35mm Din Rail 3 Phase Energy Meter PC LCD , Extension Terminal Cover
YEM024SJ 35mm Din Rail Three Phase Energy Meter Direct Mode PC LCD
Specifications :
| Operating Humidity | ≤85% |
| Storage Humidity | ≤95% |
| Operating Temperature | -20°C~+50°C |
| Storage Temperature | -30°C~+70°C |
| International Standard | IEC62053-21/IEC61010/IEC61326 |
| Waterproof & Dustproof | IP51 |
| Insulating Protective Class | II |
|
Insulation Capabilities -AC Voltage Withstand -Impulse Voltage Withstand |
4KV for minutes 6KV-1.2µS waveform |
| Auxiliary Power | 85~275VAC/120~380VDC |
| Rated Input Voltage |
100~280V AC(L-N) 100~480V AC(L-L) |
| Frequency Range | 50-60Hz |
| CT Primary Current | 1-9999A |
| CT Secondary Current | 5A(default) or 1A |
| PT Primary Voltage | 20V-500kV |
| PT Secondary Voltage | 100-500V |
| Burden | 0.5VA |
| Protocol | Modbus RTU/DL/T 645-2007 |
| Bus Type | RS485 |
| Baud Rate | 2400/4800/9600(deffault)/19200/38400bps |
| Address Range | 1-247 |
| Communication Distance | 1000M |
| Parity | EVEN(default)/ODD/NONE |
| Data Bit | 8 |
| Stop Bit | 1 |
| Voltage | 0.5% |
| Current | 0.5% |
| Frequency | 0.2% |
| Power Factor | 1% |
| Active Power(W) | ±1% |
| Reactive Power (Var) | ±2% |
| Apparent Power (VA) | ±1% |
| Active Energy (Wh) | Class 1.0 |
| Reactive Energy (VARh) | Class 1.0 |
Features :
- Measure active energy consumption
- Extension terminal cover,in order to project to use safety.
- Automatic detection the direction of load current.
Transport and storage :
- Transport and storage of the meter must not be shaken and must accord with ZBY002-81.
- The meter must be stored in the original packing box and the environmental temperature is in -20℃～＋55℃ .Relative humidity shall not exceed 95%. And there isn’t any corrosive gas. The environmental temperature shall not vary violently.The meters should be in the original packing box and the boxes should be piled up no more than five on the rack . The separate meter is not suitable for storage.
Company Profile:
- Established in 2002, Zhejiang Yomin Electric Co., LTD (before named Yueqing Yomin Electric Factory, founded in 1996) is a manufacturer and exporter specialized in the research, development and production and service of different kinds of watt-hour meters, digital meters, pointer meter, terminals and accessories etc.
- Located in Wenzhou City, Zhejiang Province, we are quite close to Shanghai and Ningbo port. Covering an area of 12000 square meters for manufacturing and administration, we now have over 370 employees making their great efforts for YOMIN. Most of our products are supplied by tender and widely used in domestic and overseas electricity power companies in more than 90 countries and regions.
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee tatal customer satisfaction. Besides, we are awarded with international certificates such as ISO9001, kEMA, CE RoHS, CB,BV etc as well as China domestic certification like CCC and CMC
Deadline of guarantee:
Within 18 months from the date of manufacture the user complies with all of above rules. If the meter still being sealed does not conform to any technical requirements of IEC62053-11, or of any certification of Power Department or Measuring Department.
Dimensions :
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.