6061 T5 Circular Shape aluminum extruded profiles / LED Aluminum Heatsink
6061 T5 Circular Shape Aluminium Extrusion Profiles for Aluminum Heat Sink
led aluminium heat sink ,aluminium profile for heat sink :
1. Aluminum extrusion profile
2. Aluminum alloy: 6000 series
3. All kinds of surface treatment, such as milling finish, powder coated, anodizing finish of all colors
4. Guaranteed quality and good price
5. Good surface finish, no burr or dirt
1, Aluminium Alloy Composition:
| Chemical Composition | 6063 T5 | ||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | total others |
| 0.2-0.6 | M.0.35 | M. 0.1 | M. 0.1 | 0.45-0.9 | M. 0.1 | M. 0.1 | M. 0.1 | M. 0.05 | 0.15 |
| Mechanical property | |||||||||
| Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
| 110Mpa | 160Mpa | 8% | 8 HW | ||||||
| Chemical Composition | 6063 T6 | ||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | total others |
| 0.2-0.6 | M.0.35 | M. 0.1 | M. 0.1 | 0.45-0.9 | M. 0.1 | M. 0.1 | M. 0.1 | M. 0.05 | 0.15 |
| Mechanical property | |||||||||
| Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
| 180Mpa | 205Mpa | 8% | |||||||
2, Aluminium profiles(classifcation according to surface treatment requirements):
1. Anodizing profiles
2. Electrophresis profiles
3. Powder coating profile.
4. Wood finish profiles
5. Polished profiles
6. PVDF coating profiles
3, Manufacture technological process:
Chief manufacture technological process:
aluminium ingot & alloy→melting and casting→extrusion→powder coating→pouring rubber for heat insulation→checkout→packing→PVDF coatinganodizingelectrophoresis→put in products warehouse.
1. Prices fob:
Need receive your draws and need surface treatment.
2. Payment terms:
30% advance payment and balance payment before the goods load into the container.
3. Handing time:
normally extrusion workshop 12hours and other workshop 9hours.
4. MOQ:
any small order quantity always best welcome.
but normally the cost for 1x40'or1x20'container order quantity are lowest cost. 40' about 20-26tons and 20'about 8-12tons.
normally if one set tooling die mould finish 3-5tons then no any die mould charge. but no problem. we will also return back the die mould money after the order quantity finish 3-5tons in 1 year.
normally one set die mould finish 300kgs then no any added machine cost.
Do not worry about that you can feel freely choose and confirm you need order quantity. anyway I will try my best supply you lowest prices.
5. Delivery time:
normally produce new die mould and sample about need 15days. 1x20'or 40'container order quantity about need 15-30days.
but we will try our best to supply you according to your need times.
24 hours services !
yuki@xinyu-aluminum.com
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.