Precision Metal Stamping Parts Polished Stainless Steel Motor Support
Precision Metal Stamping Parts Polished Stainless Steel Motor Support
Stainless steel support stamping parts are stamped a plate socket and bended a clip in strip , bended upper section to fix or secure support stamping part on object and supporting socket with flat panel is used to support something of motor .
Material
Support stamping parts are made of high tensile strength stainless steel 18-8 that with good performance or properties .
|
Tensile strength σb (MPa) |
535 |
|
Yield Strength σs (MPa) |
210 |
|
Elongation δ5 (%) |
50 |
|
Reduction of area ψ (%) |
65 |
Mechanical property of support stamping parts
|
Fusing point(℃) |
1398 to 1454 |
|
Specific heat capacity(0~100℃,KJ·kg-1K-1) |
0.5 |
|
Heat conductivity(W·m-1·K-1) |
(100℃)16.3 ,(500℃)21.5 |
Thermal performance of support stamping parts
|
Resistivity(20℃,10-6Ω·m) |
0.73 |
Electrical performance of support stamping parts
Dimensions
Length : 25 mm
Width : 25 mm
Height : 15 mm
Thickness : 0.8 mm
Chamfer : 0.5 x 45°
Note : we accept customized sizes from 0.5 mm to 5 m for different designs .
Tolerance
+/-0.1 mm for normal sizes , and refer to following tolerances standard for unspecified sizes .
| Normal Size | Thickness | |||
| FM | TO | FM | TO | m |
| 0.5 | 3 | — | 1 | ±0.10 |
| 1 | 3 | ±0.20 | ||
| 3 | 6 | — | 1 | ±0.15 |
| 1 | 4 | ±0.30 | ||
| 4 | — | ±0.40 | ||
| 6 | 30 | — | 1 | ±0.20 |
| 1 | 4 | ±0.40 | ||
| 4 | — | ±0.60 | ||
| 30 | 120 | — | 1 | ±0.30 |
| 1 | 4 | ±0.55 | ||
| 4 | — | ±0.80 | ||
| 120 | 400 | — | 1 | ±0.35 |
| 1 | 4 | ±0.70 | ||
| 4 | — | ±1.05 | ||
| 400 | 1000 | — | 1 | ±0.50 |
| 1 | 4 | ±1.00 | ||
| 4 | — | ±1.45 | ||
| 1000 | 2000 | — | 1 | ±0.65 |
| 1 | 4 | ±1.30 | ||
| 4 | — | ±2.00 | ||
| 2000 | 4000 | — | 1 | ±1.00 |
| 1 | 4 | ±2.00 | ||
| 4 | — | ±2.60 | ||
Characteristics
Stainless steel support stamping parts for motor have high tensile strength and good performance to meet continuous high-load working .
◆ High tensile strength
Tensile strength is up to 535 σb (MPa) and more higher after heat treatment .
◆ Perfect elongation
50 δ5 (%) to ensure support stamping parts have enough elongation under heavy load and pressure . .
◆ Hard material
Support stamping parts are made of stainless steel 18-8 that hardness is HRC 72 or so .
◆ Resistance to corrosion
Stainless steel 18-8 with good performance on anti-corrosion by itself . normally , not to be rusted in 5 years inside conditions .
◆ Non-magnet
Its nearly no magnet for stainless steel 18-8 support stamping parts .
Finish
Polishing for support stamping parts
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.