Stamping Aluminum Locating Plate Silver AL 5052 Oxidation With Rectangle Socket
Stamping Aluminum Locating Plate Silver AL 5052 Oxidation With Rectangle Socket
Locating plate stamping parts are stamped from aluminum panel with rectangle socket in middle and two holes close to both sides for fixing purpose .
Material
Locating plate stamping parts are made of aluminum AL 5052 .
Mechanical property
| Tensile strength σb (MPa) | 200 |
| Yield Strength σs (MPa) | 70 |
| Elongation δ 0.2 (%) | 5 |
Chemical elements
| Cu | Zn | Mg | Fe | Mn | Cr | Si | Al |
| 0.1 | 0.1 | 2.5 | 0.4 | 0.1 | 0.2 | 0.25 | balance |
Thermal performance
| Fusing point(℃ ) | 550 |
| Specific heat capacity(0~100℃,KJ·kg-1K-1) | 0.083 |
| Heat conductivity(W·m-1·K-1) | 35 |
| Resistivity(20℃,10-6Ω·m) | 0.05 |
Specification
| Length mm | 60 |
| Width mm | 20 |
| Thickness | 1.0 |
| Socket length mm | 10 |
| Tolerance mm | +/-0.1 |
Tolerances
Aluminum locating plate tolerances are ±0.1 mm for main dimensions , and refer to ISO 2768-M for unmarked sizes
| Basic sizes | Thickness | Level | ||
| FM | TO | FM | TO | m |
| 0.5 | 3 | — | 1 | ±0.10 |
| 1 | 3 | ±0.20 | ||
| 3 | 6 | — | 1 | ±0.15 |
| 1 | 4 | ±0.30 | ||
| 4 | — | ±0.40 | ||
| 6 | 30 | — | 1 | ±0.20 |
| 1 | 4 | ±0.40 | ||
| 4 | — | ±0.60 | ||
| 30 | 120 | — | 1 | ±0.30 |
| 1 | 4 | ±0.55 | ||
| 4 | — | ±0.80 | ||
| 120 | 400 | — | 1 | ±0.35 |
| 1 | 4 | ±0.70 | ||
| 4 | — | ±1.05 | ||
Key features
Good corrosion resistance
Nice appearance
No burrs and sharp edges
Strict dimensions
Long service
We are able to make more stamping parts with carbon steel ,stainless steel ,brass ,plastic and aluminum etc materials , small orders are available for us and we can deliver in several days , if you have any interesting in our stamping parts please contact us soon , Thanks .
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.