M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings
M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings
Aluminum gastroscope unit joint kits are comprised of bushing ,header and joint pipe , these parts are assembly together as a full gastroscope connector , at the end of gastroscope has a threaded section for fixing into other pieces for holding unit joint kits .
Material for gastroscope unit joint kits turned part
Gastroscope unit joint kits turned part is made of aluminum that meets light weight but with enough tensile strength requirements .
| Cu | Zn | Mg | Fe | Mn | Cr | Si | Al |
| 0.3 | 0.25 | 1 | 0.7 | 0.15 | 0.1 | 0.5 | balance |
Chemical element for unit joint kits
Dimensions for gastroscope unit joint kits turned part
| Bushing | |
| Bushing length | 25 |
| Bushing hole | 15 |
| Bushing diameter | 19.5 |
| Thread for bushing | M10 |
| Header | |
| Length | 35 |
| Diameter | 18 |
| Hole diameter | 10 |
| Joint pipe | |
| Length | 60 |
| Diameter | 19.5 |
| Hole diameter | 10 |
| Thread | M10 |
Unit : mm
Standard for unspecified tolerances
Tolerances for gastroscope unit joint kits turned part normally are +/-0.05 mm and unspecified tolerances are based on ISO 2768-m with f level .
| Level | 0.5-0.3 | 3-6 | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | 2000-40000 |
| f | ±0.05 | ±0.05 | ±0.1 | ±0.15 | ±0.2 | ±0.3 | ±0.5 | - |
Linear tolerances
| Level | 0.5-0.3 | 3-6 | Above 6 |
| f | ±0.2 | ±0.5 | ±1 |
Radius and chamfer tolerances
| Level | 0-10 | 10-50 | 50-120 | 120-400 | above 400 |
| f | ±1° | ±0°30' | ±0°20' | ±0°10' | ±5° |
Angle tolerances
Finish for gastroscope unit joint kits turned part
Black oxidation with bright surface .
Mechanical property for gastroscope unit joint kits turned part
| Tensile strength σb (MPa) | 310 |
| Yield Strength σs (MPa) | 276 |
| Elongation δ 0.2 (%) | 12 |
| Reduction of area ψ (%) | 25 |
Physical performance for gastroscope unit joint kits turned part
| Specific heat capacity(0~100℃,KJ·kg-1K-1) | 896 |
| Heat conductivity(W·m-1·K-1) | 43 |
| RResistivity(20℃,10-6Ω·m) | 0.059 |
| Density g/cm3) | 2.73 |
Characteristics for gastroscope unit joint kits turned part
1 , Strict dimensions with small tolerances
2 , Black oxidation with RoHS comply
3 , No burrs and scratch
4 , Harden material
5 , Corrosion resistant
We have more than ten years experience on customized turned parts with CNC and Auto lathe parts , products are used to different fields in industry , if you have any interesting on our product , please contact us soon .
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.