GFS Industrial Storage Tanks For Waste Water Treatment
GFS industrial wastewater storage tank For WasteWater Treatment
The wastewater industry is full of general rules of thumb and best practices, one of which is often overlooked is choosing the right storage tank with the right coating for the application. Since the term "wastewater" represents a broad cross-section of composition, waste stream composition, compound, source, and intensity, it is not surprising that the general rule of thumb is this, too general. Wastewater flows vary greatly, especially in the industrial sector, as are the options for effective treatment. Just as careful selection of the correct process and technology is a necessary condition for successful (ie license-driven) processing results, the same is true for the storage tanks where the initial storage and final processing takes place.
Bolted steel industrial wastewater storage tank is assembled by Glass-Fused-To-Steel plate and fixed by self - locking bolt. Then the sealing glue is applied to the joint gap and bolt position to improve airtightness of the tank. The service life of Glass-Fused-To-Steel tank is more than 30 years, because the Enamel glaze and steel plate surface are fused together after heat treatment at 850-940℃ and then create a tough and inert bond, which combines the strength of steel with the outstanding chemical and physical corrosion resistance of glass.
Bolted steel industrial wastewater storage tank Specifications
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater saltwater, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds |
Bolted steel industrial wastewater storage tank
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2021, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 80 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Industrial wastewater storage tank Project References
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.