CE Approved Salt Spray Corrosion Test Chamber with Calibration Report        

Model No.: SH-90               
Internal Dimension:W900xD600xH500MM;        
External dimension:W1400xD900xH1200MM        
            
Material: 
    1.Test chamber material :PVC board        
    2.The chamber sealed by impact-resistany acrylic board.        
    3.Saturated air barrels:SUS304 stainless steel(excellent high temperature& high pressure resistant performance)        
            
Constant temperature control settable:        
    (A)Salt Spray Test: NSS,ACSS        
       1.testing zone temperature : 35℃(+/-)2℃        
       2.Saturated air barrels temperature : 47℃(+/-)2℃        
    (B)Corrission resistance test:        
       1.Laboratory: 50℃(+/-)2℃        
       2.Saturated air barrels: 63℃(+/-)2℃        

Air supply system:        
    "1.Air pressure is 1 kg/cm2, divided into two sections adjustment"        
    "2.First step is rough adjustment : 2 kg/cm2 imported type air filter with drainage function, the second step is  precision adjustment : 1 g/cm2 Pressure gauge"        
            

Spray fog method:        
 1.Adopt  Knut principle  to absorb brine to atomization, uniform atomization degree, to ensure continuous testing standard.       
  2.Fog Spray quantity: adjustable type 1-2ml(ml/80cm2/h) (average quantity of 16 hours)        
  3.Spray method: continuous spray.        
  

Heating system
  Adopting the direct heating mode, fast heating, reduce the standby time, when the temperature reaches ,the ON/OFF switch shift automatically,temperature precision, less power consumption.        
            
Control System:        
 1.Test Chamber temperature controller 0 ~ 99.9 ℃, LCD display with Dual digital display
, with P.T.D automatic calculation function, temperature deviation ± 0.3 ℃       
  2.Saturated air barrel temperature controller 0 ~ 99.9 ℃, LCD display with Dual digital display, with P.I.D automatic calculation function, error of the temperature control in ±0.3 ℃      
  3.timmer : 0~9990hr        
  4.Digital controller:0.1s~9990hr        
  5. air pressure range of the gauge: 0~5kg/cm2        
  6.temperature senser        
  7.electromagnetic valve        
  8. electric relay        
            
Water system:         
Adopting automatic adding water supplement system, automatically added, when the water level is too low        
            
Safety Protection Device:        
    automatic  power cut off supply device while water level is too low      
    automatic  power  cut off supply device for over temperature        
    alarm light device        
                    
Standard comply:

This system conforms to the salt spray test of the reliability test specification:        
   ASTM B-117,B-368,D-380, JIS D-0201,D-0205,H-8681,CNS C-6014,H-2040,Z-8026,        MIL,NACE,IEC,DIN,SAE