China Double 85 Test High Temperature Humidity Chamber for PV modules test for sale

Double 85 Test High Temperature Humidity Chamber for PV modules test

Price Negotiable

Price: Negotiation

MOQ: 1 Set

Delivery Time: 10 to 15 work days( standard model have stock)

Brand: ASLi

Product Description

(Double 85 Test) High Temperature &High Humidity Test Chamber for PV modules test

No.	Test Name	Test Purposes	Equipment Name	Equipment Model	Main Technical Parameters	Brand
1	Damp Heat Test (Double 85 Test)	To determine the ability of the module to withstand the effects of long-term penetration of humidity.	(Double 85 Test) High Temperature &High Humidity Test Chamber		Test Requirement: Method:Put the modules into the chamber according national standard and IEC61215UL1703,Test Temperature 85 ± 2 ℃,Test Humidity 85% ± 5%,Test Time 1000h or 3000H.	ASLi
2	Humidity-Freeze Test	The purpose of this test is to determine the ability of the module to withstand the effects of high temperature and humidity followed by sub-zero temperatures. This is not a thermal shock test	(Humidity-freeze Thermal Cycling Test) High-low Temperature Humidity Test Chamber		Test Requirement: Method:Put the modules into the chamber accoring to national standard andIEC61215UL1703,Test Temperature 85 ± 2 ℃,Test Humidity 85% ± 5%,Test time 20h ,then test under -40 ℃ for0.5h ,10times cycling ;which the temperature rising and falling speed requires:100℃or 200℃/H .	ASLi
3	Thermal Cycling Test	To determine the ability of the module to withstand thermal mismatch, fatigue and other stresses caused by repeated changes of temperature.	High-Low Temperature Cycling Chamber		Test Requirement: Method:Put the specimen into the chamber according to national standard and IEC61215UL1703,Test Temperature-40 ℃,Test time 10M ,then under 85 ± 2 ℃for 10M ,continuously 200 times cycle,in which temperature rise/fall speed requires 100℃/H .	ASLi
4	UV Preconditioning Test	To precondition the module with ultra-violet (UV) radiation before the thermal cycle/ humidity freeze tests to identify those materials and adhesive bonds that are susceptible to UV degradation	UV Aging Test Chamber		Test Requirement: Method: Put the specimens into the UV aging chamber according national standard and IEC61215UL1703,using 340nm wavelength UV for component and raw materialradiation.	ASLi
5	Corrosion Test	To determine the module ability to withstand corrosion	Salt Spray Test Chamber		Test Requirement: Method: Put the specimens in the salt spray chamber according to national standard and IEC61215UL1703:Temeprature setting : saturated air barrel: 47℃(+/-)1℃ ; Testing room:35℃(+/-)1℃; Angle 35°.	ASLi
6	Hot Spot Endurance Test	To determine the ability of the module to withstand hot-spot heating effects, for example solder melting or deterioration of the encapsulation	Xenon Light Aging Test Chamber		Test Requirement: Method: Put the specimen into the xenon aging test chamber accoring to national standard and IEC61215UL1703:Temperature +25℃~+85℃;Wave Range:295-780nm;Humidity 45%~98% ; Rain Pressure 80~120KPA ; Testing Time 300H .	ASLi