Slim And Long High Precision CNC Cutting Tools For Face And Cavity Machining
Slim And Long High Precision CNC Cutting Tools For Face And Cavity Machining
Ⅰ. Features And Advantages
- Runout<0.003mm.
- Non-eccentric fully round nut, fits for high speed precision machining.
- Running on low noise and small wind resistance.
- High surface quality available.
- Wide application range.
Ⅱ. Technical Parametes
|
Product Name |
GSK High Speed Tool Hoder |
|
Spindle Type |
SK40 |
|
Clamping Range |
0.8mm~6mm |
|
Runout |
0.003mm |
|
Processing Type |
High speed machining and finishing |
| Taper Standard |
AT3 |
|
Hardness |
HRC58~60° |
SK6 Collet List
| Item Name | Model Number | Diameter |
|
SK6
Collet |
SK6-0.8 | 0.75-0.8 |
| -1 | 0.9-1.0 | |
| -1.25 | 1.15-1.25 | |
| -1.5 | 1.3-1.5 | |
| -1.75 | 1.55-1.75 | |
| -2 | 1.8-2.0 | |
| -2.25 | 2.05-2.25 | |
| -2.5 | 2.3-2.5 | |
| -2.75 | 2.55-2.75 | |
| -3 | 2.8-3.0 | |
| -3.5 | 3.0-3.5 | |
| -4 | 3.5-4.0 | |
| -4.5 | 4.0-4.5 | |
| -5 | 4.5-5.0 | |
| -5.5 | 5.0-5.5 | |
| -6 | 5.5-6.0 |
Ⅲ. Product Introduction
Standard Items
Model Number |
d Clamp Diameter |
D1 | D2 | L1 | L2 | M | Nut | Collet | COLLET PULLER | Spanner |
| SK40-GSK06-75 | 2.0-6.0 | 19.5 | 20 | 75 | 52.7 | M15.5*1.0 | HN-GSK06 | SK06 | CX06 | GH19 |
| SK40-GSK06-90 | 2.0-6.0 | 19.5 | 20 | 90 | 67.7 | M15.5*1.0 | HN-GSK06 | SK06 | CX06 | GH19 |
| SK40-GSK06-120 | 2.0-6.0 | 19.5 | 20 | 120 | 97.7 | M15.5*1.0 | HN-GSK06 | SK06 | CX06 | GH19 |
| SK40-GSK10-75 | 3.0-10.0 | 27.1 | 27.6 | 75 | 52.7 | M21.5*1.0 | HN-GSK10 | SK10 | CX10 | GH27 |
| SK40-GSK10-90 | 3.0-10.0 | 27.1 | 27.6 | 90 | 67.7 | M21.5*1.0 | HN-GSK10 | SK10 | CX10 | GH27 |
| SK40-GSK10-120 | 3.0-10.0 | 27.1 | 27.6 | 120 | 97.7 | M21.5*1.0 | HN-GSK10 | SK10 | CX10 | GH27 |
| SK40-GSK10-150 | 3.0-10.0 | 27.1 | 27.6 | 150 | 127.7 | M21.5*1.0 | HN-GSK10 | SK10 | CX10 | GH27 |
| SK40-GSK13-75 | 3.0-13.0 | 33 | 33.5 | 75 | 52.7 | M27.0*1.0 | HN-GSK13 | SK13 | CX13 | GH33 |
| SK40-GSK13-90 | 3.0-13.0 | 33 | 33.5 | 90 | 67.7 | M27.0*1.0 | HN-GSK13 | SK13 | CX13 | GH33 |
| SK40-GSK13-150 | 3.0-13.0 | 33 | 33.5 | 150 | 127.7 | M27.0*1.0 | HN-GSK13 | SK13 | CX13 | GH33 |
| SK40-GSK16-75 | 3.0-16.0 | 40 | 40.5 | 75 | 52.7 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK40-GSK16-90 | 3.0-16.0 | 40 | 40.5 | 90 | 67.7 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK40-GSK16-120 | 3.0-16.0 | 40 | 40.5 | 120 | 97.7 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK40-GSK16-150 | 3.0-16.0 | 40 | 40.5 | 150 | 127.7 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK40-GSK20-75 | 4.0-20.0 | 48 | 48.5 | 75 | 52.7 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK40-GSK20-90 | 4.0-20.0 | 48 | 48.5 | 90 | 67.7 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK40-GSK20-120 | 4.0-20.0 | 48 | 48.5 | 120 | 97.7 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK40-GSK20-150 | 4.0-20.0 | 48 | 48.5 | 150 | 127.7 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK40-GSK25-90 | 6.0-25.0 | 55 | 55.5 | 90 | 67.7 | M45.0*1.5 | HN-GSK25 | SK25 | CX25 | GH55 |
| SK40-GSK25-120 | 6.0-25.0 | 55 | 55.5 | 120 | 97.7 | M45.0*1.5 | HN-GSK25 | SK25 | CX25 | GH55 |
| SK50-GSK10-105 | 3.0-10.0 | 27.1 | 27.6 | 105 | 87.2 | M21.5*1.0 | HN-GSK10 | SK10 | CX10 | GH27 |
| SK50-GSK10-135 | 3.0-10.0 | 27.1 | 27.6 | 135 | 112.7 | M21.5*1.0 | HN-GSK10 | SK10 | CX10 | GH27 |
| SK50-GSK13-105 | 3.0-13.0 | 33 | 33.5 | 105 | 87.2 | M27.0*1.0 | HN-GSK13 | SK13 | CX13 | GH33 |
| SK50-GSK13-135 | 3.0-13.0 | 33 | 33.5 | 135 | 112.7 | M27.0*1.0 | HN-GSK13 | SK13 | CX13 | GH33 |
| SK50-GSK13-165 | 3.0-13.0 | 33 | 33.5 | 165 | 142.7 | M27.0*1.0 | HN-GSK13 | SK13 | CX13 | GH33 |
| SK50-GSK16-105 | 3.0-16.0 | 40 | 40.5 | 105 | 87.2 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK50-GSK16-135 | 3.0-16.0 | 40 | 40.5 | 135 | 112.7 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK50-GSK16-165 | 3.0-16.0 | 40 | 40.5 | 165 | 142.7 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK50-GSK16-200 | 3.0-16.0 | 40 | 40.5 | 200 | 177.7 | M32.0*1.0 | HN-GSK16 | SK16 | CX16 | GH40 |
| SK50-GSK20-105 | 4.0-20.0 | 48 | 48.5 | 105 | 87.2 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK50-GSK20-135 | 4.0-20.0 | 48 | 48.5 | 135 | 112.7 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK50-GSK20-165 | 4.0-20.0 | 48 | 48.5 | 165 | 142.7 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK50-GSK20-200 | 4.0-20.0 | 48 | 48.5 | 200 | 177.7 | M40.0*1.0 | HN-GSK20 | SK20 | CX20 | GH48 |
| SK50-GSK25-105 | 6.0-25.0 | 55 | 55.5 | 105 | 82.7 | M45.0*1.5 | HN-GSK25 | SK25 | CX25 | GH55 |
| SK50-GSK25-135 | 6.0-25.0 | 55 | 55.5 | 135 | 112.7 | M45.0*1.5 | HN-GSK25 | SK25 | CX25 | GH55 |
| SK50-GSK25-165 | 6.0-25.0 | 55 | 55.5 | 165 | 142.7 | M45.0*1.5 | HN-GSK25 | SK25 | CX25 | GH55 |
| SK50-GSK25-200 | 6.0-25.0 | 55 | 55.5 | 200 | 177.7 | M45.0*1.5 | HN-GSK25 | SK25 | CX25 | GH55 |
Ⅳ. Overview for HIPPSC Products
1. SK40-GSK6-90 High Speed GSK Tool Holder with G2.5 25000RPM.
2. High Speed ER/SK/GER/GSK Tool Holder/Shank/Arbor for CNC Working.
3. Heat Shrink-Fit/Shrinking Tool Holders/Shanks/Arbors.
4. Threaded/Screw-on/Thread Screw Tool Holders/Arbors/Shank.
5. Back Lock/Side Lock Tool Holders/Arbors/Shanks.
6. Tool Holders/Arbors/Shanks for Mirror Finishing.
7. Morse Taper/Tapering Tool Holders/Shanks.
8. Face Milling Adapters/Tool Holders/Arbors/Shanks.
9. Drilling/Driller Chuck Holders/Tool Holders/Shanks/Arbor.
10. Torque Floating Tap/Tapping Chuck and Collet.
11. ER/SK/Hydraulic/Back lock/Floating tapping Collet
12. Torque/ Round/Circle Spanners/Wrenches/Keys.
13. ER/SK/Back lock/Shrink fit Extension Rod/ Tool bit.
14. Nuts/Pull stud/Bolt Blind rivet/Spindle taper wiper/Test bar/Tester.
15. Edge finder/Tool Holder Tightening Fixture/Table.
16. Inserts/PCD/Milling/Boring/PCBN Inserts/Blade/Cutters/Tool bit.
17. Quick Change Ball nose/Triangle/Pentagon/Horseshoe Tool bit.
18. Cutterhead/ Cutter heard/bar, face milling cutter.
19. BT/BBT/SK/CAT/HSK/ISO/NT Spinder Type Tool Holder/Shank/Arbor
20. Indexable Tools.
Ⅵ. Packing
PE Bag.
Plastic Box
Carton Box.
Other Materials
Rust Presensitive Oil.
Adhesive Tape.
Packing Belt.
Ⅶ. Warehouse
1. Sufficient Inventory For All Standard Products to Guarantee On-time Delivery.
2. All Materials and Products Must Be Inspected and Checked Strictly and Carefully
By IQC and OQC Operater Before Being Shipped Out.
3. Using Special Equipment and Gauge To Check Technical Parameters.
Ⅷ. Manufacturing and Sales Service
1. Manufacturing with Professional and Precise Equipments Under Experienced Workers.
2. OEM and ODM Service Are All Available Here, Produce To Customer's Need/Requirement.
3. Professional Serving Team Provides One-Stop Considerate and Satisfying Service To You.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.