AT3 Type ER Tool Holder High Speed Carving / Milling Tool Handle 20Crnimo Material
AT3 Type ER Tool Holder High Speed Carving / Milling Tool Handle 20Crnimo Material
Ⅰ. Features And Advantages
- Fast cutting, better chip removal.
- Wide machining range, for both metal and nonmetal.
- Good blade positioning for producing maximum continuous cutting processing.
- Fit for all kinds of cutting processing.
- MS full round nuts, special for large diameter cutters
- Dynamic Balance G2.5, 25000 RPM
Ⅱ. Technical Parametes 
Ⅲ. Product Introduction
Cat.NO | Chucking Dia | D | L1 | L2 | M | Nut | Collet | Spanner | Spanner | Lock knife |
| ISO20-ER16-35MS | 3.0-10.0 | 22 | 35 | 27 | M19*1.0 | HN-ER16MS | ER16 | ISO20 | HS-ER16MS | ISO20 |
| ISO20-ER20-35MS | 3.0-13.0 | 28 | 35 | 27 | M24*1.0 | HN-ER20MS | ER20 | ISO20 | HS-ER20MS | ISO20 |
| ISO25-ER16-35MS | 3.0-10.0 | 22 | 35 | 27 | M19*1.0 | HN-ER16MS | ER16 | ISO25 | HS-ER16MS | ISO25 |
| ISO25-ER20-35MS | 3.0-13.0 | 28 | 35 | 27 | M24*1.0 | HN-ER20MS | ER20 | ISO25 | HS-ER20MS | ISO25 |
| ISO25-ER25-35MS | 3.0-16.0 | 35 | 35 | 27 | M30*1.0 | HN-ER25MS | ER25 | ISO25 | HS-ER25MS | ISO25 |
| ISO30-ER16-60MS | 3.0-10.0 | 22 | 60 | 44.1 | M19*1.0 | HN-ER16MS | ER16 | -- | HS-ER16MS | ISO30 |
| ISO30-ER20-60MS | 3.0-13.0 | 28 | 60 | 44.1 | M24*1.0 | HN-ER20MS | ER20 | -- | HS-ER20MS | ISO30 |
| ISO30-ER25-60MS | 3.0-16.0 | 35 | 60 | 44.1 | M30*1.0 | HN-ER25MS | ER25 | -- | HS-ER25MS | ISO30 |
Ⅳ. Overview for HIPPSC Product
1. Torque Floating Tap/Tapping Chuck and Collet.
2. Torque/ Round/Circle Spanners/Wrenches/Keys.
3. Edge finder/Tool Holder Tightening Fixture/Table.
4. ER/SK/Back lock/Shrink fit Extension Rod/ Tool bit.
5. Quick Change Ball nose/Triangle/Pentagon/Horseshoe Tool bit.
6. Nuts/Pull stud/Bolt Blind rivet/Spindle taper wiper/Test bar/Tester.
7. BT/BBT/SK/CAT/HSK/ISO/NT Spinder Type Tool Holder/Shank/Arbor.
8. High Speed ER/SK/GER/GSK Tool Holder/Shank/Arbor for CNC Working.
Ⅵ. Packing
PE Bag.
Plastic Box
Carton Box.
Other Materials
Rust Presensitive Oil.
Adhesive Tape.
Packing Belt.
Ⅶ. Warehouse
Sufficient Inventory For All Standard Products to Guarantee On-time Delivery.
All Materials and Products Must Be Inspected and Checked Strictly and Carefully
By IQC and OQC Operater Before Being Shipped Out.
Using Special Equipment and Gauge To Check Technical Parameters.
Ⅷ. Manufacturing and Sales Service
Manufacturing with Professional and Precise Equipments Under Experienced Workers.
OEM and ODM Service Are All Available Here, Produce To Customer's Need/Requirement.
Professional Serving Team Provides One-Stop Considerate and Satisfying Service To You.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.