Portable LED Photography Lights LED Video Ring Light High CRI Still Life
Portable LED Photography Lights LED Video Ring Light High CRI Still Life
What's Includied
1 x LED C-318RL LED Ring Light
2 x 4400 mAh battery
1 x Battery charger
1 x 12V 2A AC charger adapter
1 x 12V 40W AC adapter
1 x Carrying case
Product Specifications
| Model Number | C-318RL |
| LED TYPE | SMD |
| Shape | Rectangle |
| Demension | Φ 260 × 50 mm |
|
Color termperature |
5600±300K Daylight |
|
Illuminance |
900Lux/0.5m 273Lux/m |
| Battery life time | Charge and Discharge for approx. 500 times |
| Continuous working time | Approx 2 hrs |
| Battery Recharging Time | Approx 4-5 hrs |
| CRI | ≥ 90 |
Product Characteristics
- The Flapjack lights are metal maded (aluminum alloy), very firm and good to heat dissipation. It produce little heat and have a very low current draw.
- Instead of forward-facing LEDs like in a conventional panel, the Flapjack's LEDs are mounted around the outer edge, aimed inward at layers of diffusion material. The internally bounced light is easier on the eyes - your subject can look directly toward the light with no discomfort.
- The light is fully dimmable from 10-100%. A back-lit LCD indicator shows light level and brightness status.
- Every Flapjack light runs on either AC power or a NP-F style rechargeable battery, both of which are included in the kit.
![]()
DIAGRAM
Operation
1. Install the battery onto the light.Turn on the power & brightness dimming kob and light works.
2. The right side of LCD shows the battery level .
Four columns: 75%-100%
Three columns: 50%-75%
Two columns: 25%-50%
One column: 10%-250%
No colimn: 10% or less
3. Pls adjust the brightness (10%-100%) of C-318RL through the power & brightness dimming knob.
4. When the colum on the LCD flicks, it means the battery runs out, pls press the installation and uninstallation button to take off the battery. It takes 4-5hrs to recharge it.
Cautions:
1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may seriously damage the battery or cause a
fire.
8. It is not allowed to throw the battery into fire.
Warranty:
The LED light is guaranteed for 12 months.
The battery is guaranteed to be charged and discharged for 500 times.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.