HCDX-Y2 Portable AC Electromagnetic Yoke for Welded Joint Inspection
| Attribute | Value |
|---|---|
| Working temperature | -10 ~ +40°C |
| Storage temperature | -20 ~ 50°C |
| Relative humidity | <80% non condensation |
| Electrode spacing | 0～210mm |
| Maximum current | 2.8A |
| AC minimum power hoisting power | >4.5kg (44N) |
The HCDX-Y2 is an AC electromagnetic yoke, ergonomically designed to improve productivity. The yoke generates a strong AC magnetic field for the detection of surface indications during magnetic particle testing.
Lightweight with an ergonomic grip and trigger, the HCDX-Y2 is designed for the rugged demands of field inspection. Featuring replaceable spare parts body design, isolated trigger switch, power cord, mainboard, UV & white light lamp and legs all can be replaced by user, the HCDX-Y2 is easily serviceable not stop a job from getting done.
A super bright LED attachment is available as an optional item to help illuminate the inspection area while simultaneously magnetizing the part. All-in-one Kits are also available, including Red and Gray magnetic powders, a yellow paint marker, and cleaning cloth, for a full inspection kit in one convenient carrying case.
| Model Items | HCDX-Y2 |
|---|---|
| Electrical Requirements | AC110-115V 50/60Hz AC220-230V 50/60 Hz AC240V 50/60Hz |
| Waveform | AC |
| Tangential Field Strength | > 2kA/m at midpoint between legs / poles |
| Working temperature | -10～+40℃ |
| Duty Cycle | 50%, max on time is 90 seconds |
| Ingress Protection (IEC 60259) | IP54 |
| Relative humidity | <80% |
| Sensitivity | ASTM E1444-05,ASME 2007 page number V |
| AC working current | AC2.2A |
| Leg / Pole Span | 0~220mm |
| Leg size | 22*22mm |
| Power cord length | 3M |
| AC Lifting Force | ≥7.1kg (69N) |
| Yoke Weight | 2.3kg |
- Sealed, durable construction
- Chemical and abrasion resistant
- AC operation for surface and sub-surface inspection
- Exceeds ASTM lifting specifications
- The DC magnetizing power supply (DC battery pack) can be used to realize the DC magnetization function
- When the lifting force is not enough, the power is automatically cut off to ensure the sensitivity of flaw detection
- The power display function can display the current battery power, and has the function of sound and light alarm
- Built in microcomputer chip to stabilize output voltage and ensure detection sensitivity
- Adjustable magnetization
- Special working waist bag can carry battery pack, magnetic suspension, contrast agent, yoke probe, etc.
| Work temperature rise | <18°C |
| Temporary load rate | >50% |
| Sensitivity | A1 standard test piece 15/50 groove clearly displayed |
| Weight | 2.6kg |
- HCDX-Y2 Yoke
- Power cord
- Calibration certificate
- Warranty card
- Carrying case
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.