NDT Instrument Calibration Blocks Eddy Current Flaw Detector
Price:
Negotiable
MOQ:
1pc
Delivery Time:
3~7 days after payment
Brand:
HUATEC
Product Description
NDT Instrument Calibration Blocks Eddy Current Flaw Detector
| Material | 1018 Carbon steel | Standard | As drawing | Blank type | Forged parts |
| Model | EDDY CURRENT | Serial number | 101201 | Heat treatment |
CAST NO: C-0201251 HEAT NO: R-0201251 |
Chemical composition of materials:The main chemical composition shall comply with ASTM A108
Material grain size:The grain size of this material shall be above grade 7 after fire stop treatment
Internal defects:Use 5MHz straight probe to conduct contact ultrasonic flaw detection on the test block, and there shall be no missing filling echo greater than 1 / 4 of the echo amplitude of db-pz2-2 flat bottom hole of the test block
Refraction angle deviation:When using a 2.5MHz angle probe with a refraction angle of 45 degrees, it shall not exceed ± 2 degrees
Appearance roughness:The appearance shall be smooth without obvious scratches, bumps, rust and other defects, and the surface roughness detection surface shall not be lower than RA3.2
Geometric dimension:Dimension, tolerance ± 0.1, perpendicularity of each side not greater than 0.05
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HUATEC GROUP CORPORATION
Location
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Contact Person
Ms. Shifen Yuan