TG-50 OLED Ultrasonic Thickness & Coating Thickness and Vibration three in one Electromagnetic Ultrasonic Thickness Gauge
TG-50 OLED Ultrasonic Thickness & Coating Thickness and Vibration three in one
Electromagnetic Ultrasonic Thickness Gauge
TG-50 Electromagnetic Ultrasonic Thickness Gauge is a pen type ultra small, non-contact thickness measurement instrument that does not require acoustic coupling agents. It can achieve thickness measurement of metal or magnetic materials, while also measuring the thickness of the coating layer on the outside of magnetic workpieces. When the instrument is attached to the workpiece, it can measure the vibration of the workpiece.
Product Features:
l Small size, easy to carry
l Low requirements for the surface of the workpiece, no need for polishing treatment on rough surfaces, and non-contact measurement can be achieved
l Insensitive to coatings, enabling thickness measurement of coated workpieces
l No acoustic coupling agent is required, thickness measurement of high-temperature workpieces can be achieved, and temperature compensation can be performed
l 1.3-inch high-definition IPS circular LCD screen display, 360° without blind spots
l 0.42-inch OLED screen, high brightness display acceleration
l Electromagnetic ultrasonic thickness gauge, coating thickness measurement and vibration analysis three in one
General Characteristics:
A, The instrument consists of a host and a mobile phone, which are wirelessly connected via WiFi
B, The instrument adopts the principle of electromagnetic ultrasound, and the inspection process does not require polishing the surface of the workpiece and coupling agent
C, The probe and host are integrated, and the probe can be replaced
D, After connecting the phone and pad, there are two functions: A-scan and B-scan
E, Configurable probe types: probe (≤80℃, short-term measurement), high temperature probe (≤800℃, short-term measurement)
F, Configurable high-temperature handle: short handle (meets measurement requirements up to 350°C, short-term measurement), long handle (meets measurement requirements up to 800°C, short-time measurement)
Basic parameters:
|
Measuring range |
1-240.0mm |
|
Maximum lift-off distance |
3.5mm |
|
Detectable workpiece materials |
Carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum, titanium and other conductor materials |
|
Error range of measuring equipment |
Workpiece thickness<10mm ,error 0.05mm Workpiece thickness>10mm , error +(0.01+H/200) mm (H is the thickness of workpiece) |
|
Receiving gain |
≤100dB |
|
Maximum measuring range of coating |
6mm |
|
Vibration measuring range |
0-156m/s2 |
|
The maximum tilt angle of the probe |
±25° |
|
Minimum diameter (curvature) of detectable workpiece |
6mm |
|
Probe field excitation method |
Permanent magnet |
|
Type of sound wave |
Shear wave |
|
Waveform display |
Positive half wave, negative half wave, full wave, radio frequency wave, envelope wave |
|
Adjustment range of sound velocity of sound wave |
1000-9999 m/s |
|
High temperature compensation |
With high temperature sound velocity automatic compensation function |
|
Power supply |
Built-in lithium battery, working time not less than 4 hours |
|
Low power mode |
Support Gecko mode,Standby time can reach more than 20 hours |
|
The normal working temperature range of the host |
-10~+50℃ |
|
Host storage temperature range |
0-+40℃ |
|
Host weight |
250g(with normal temperature probe) |
|
Host size |
Length170mm× width 40mm× thickness 35mm |
Standard Configurations
|
Serial number |
Name |
Quantity |
Remark |
|
1 |
Host TG-50 |
1 |
|
|
2 |
Normal temperature probe |
1 |
4MHz,42mm*32mm |
|
3 |
Charging data cable |
1 |
|
|
4 |
Charging plug |
1 |
|
|
5 |
Manual & calibration certificate |
1 |
|
|
6 |
Iron based test block |
1 |
|
|
7 |
Aluminum based test block |
1 |
|
|
8 |
Packing box |
1 |
|
Optional Configuration(You can choose to order according to your needs, which is not included in the standard configuration)
|
Serial number |
Name |
Quantity |
Remark |
|
1 |
High temperature probe |
1 |
4MHz,Φ33mm*40mm |
|
2 |
Small diameter normal temperature probe |
1 |
4MHz,Φ13mm*36mm |
|
3 |
Large diameter normal temperature probe |
1 |
4MHz,Φ40mm*60mm |
|
4 |
Mobile phone |
1 |
Support Android, HarmonyOS system |
|
5 |
Pad |
1 |
Support Android, HarmonyOS system |
|
6 |
Wrist watch |
1 |
Support Android, HarmonyOS system |
|
7 |
PC software |
1 |
APP software |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.