HFD-UT Series Multi Channel Ultrasonic Flaw Detector Core Module Network Communication Secondary Development Equipment
HFD-UT Series Multi Channel Ultrasonic Flaw Detector Core Module Network Communication Secondary Development Equipment
The HFD-UT2C/UT4C/UT8C/1616C/UT40C series is our new multi-channel ultrasonic data acquisition and secondary development platform. It integrates ultrasonic high-voltage transmission, echo signal reception, amplification, AD acquisition and processing functions. Besides it provides the secondary developments for user to develop new software--The processing of the data logged by the HFD-UT2C~UT40C enables users to customize functions and interfaces, and then integrate them into the system to form a variety of ultrasonic application systems.
HFD-UT8C means that the instrument has 8 UT channels and channels are blockable.
*Note: If more channels are needed, please take the HFD-UT40C into consideration, which supports 40 UT channels.
Specifications:
|
Emitter |
|
|
PRF |
25～10KHz |
|
Voltage |
Negative square wave, -25～-300V, 25V Stepping |
|
Pulse width |
30～1000ns,5ns Stepping |
|
Trigger |
Internal/ external/ Encoder |
|
Receiver |
|
|
Horizontal Linearity Error |
≤0.4% |
|
Vertical Linearity Error |
≤3% |
|
Surplus Sensitivity |
≥56dB when using 2.5P20 probe to detect 200mm block with Φ2 flat bottom hole. |
|
Damping |
400, 80 |
|
Sampling Rate |
100M |
|
Working Frequency |
0.5～15MHz |
|
Gain |
0.0～110.0dB |
|
Filter |
Wide-band and narrow-band |
|
Rectification |
Positive, Negative, Full-play, RF, Spectrum |
|
Crosstalk between channels |
>60dB |
|
Maximum input signal |
14VPP |
|
Coverage |
0.0～10000mm (Steel Longitudinal wave), adjustable in continuity, min step 0.1mm |
|
Display delay |
0～999.9μs |
|
Display shift |
-7.5～3000μs |
|
Signal Processing |
|
|
Gate |
A,B |
|
Starting point gate |
Full scope |
|
Gate Width |
Starting point to full range |
|
Gate Height |
5～95% |
|
Test Mode |
Frontier, Peak |
|
Data Display |
Reading in Gate: Range & Sound Path |
|
Measuring Resolution |
0.1mm |
|
System/other |
|
|
Power Consumption |
15W,varies according to Configuration |
|
Data Transmission |
1000M Ethernet |
|
Angle |
L-Scan -75°～+75°, stepping 0.1, 1, 10 adjustable; S-Scan -75°～+75°, step automatic optimization |
|
Size |
188×238×403; 100×200×300 |
|
Port |
Q5 |
|
Encoder Port |
2 Incrementing encoder |
|
USB Port |
2 |
|
I/O Port |
Round type |
|
Net Port |
100M/1000M Ethernet |
|
Debug Port |
COM 1 |
Structural principle:
The HFD-UT8C is an independent module, which is connected to the monitoring host through the network cable. The software running on the monitoring host sends instructions to the HFD-UT8C through the network interface, and receives the data returned from the HFD-UT8C, as shown in the figure below.
Features:
Secondary Developments
l Provide a full set of client sample programs DEMO source code. The DEMO code already has basic multi-channel ultrasonic functions. Users can refer to the DEMO code for secondary development or add functions directly to the DEMO code for development.
l Thoughtfully designed secondary programming access enables an intuitive and simple programming, supporting manual debugging. Before programming, user can send instruments to the HFD-UT2C~UT40C manually to test the effect of the modification of parameters
Excellent Physical Features
l Internal integrated ultrasonic excitation circuit, negative square wave form, voltage adjustable from - 25V to - 300V, adjustable pulse width from 30ns to 1000ns, maximum matching with different types of transmitting elements.
l Internal integrated with most of the signal processing and detection functions required by ultrasonic flaw detection instrument, such as A-wave compression, gate detection, sound path measurement, etc., you can quickly set up a standard ultrasonic flaw detection system.
l Offers raw data for user-processing by sending raw AD acquisition data to clients
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.