TG-5100D Real Time A Scan and B Scan Through Coating Ultrasonic Thickness Gauge
TG-5100D Real Time A Scan and B Scan Through Coating Ultrasonic Thickness Gauge
Main functional features
1. Simple single-level parameter configuration menu
2. Real time A- scanning. The user can see the ultrasonic signal waveform directly on the screen, which is used to verify the thickness reading is correct, analyze the cause of the problem, and help the user find a solution to the problem.
3. When the probe is coupled with the workpiece, the thickness value is displayed in white font.
4. Thickness alarm: alarm thickness limit can be set, and the color of thickness reading can be dynamically changed during alarm.
5. Maximum mode: capture the maximum and minimum values in the measurement process
6. Difference mode: Obtain the difference between the current thickness measurement value and the nominal thickness and the percentage of difference value and the nominal thickness
7. Support millimeter and inch thickness units
8. Large capacity data storage function: can store 100,000 thickness values
9. Can penetrate the coating on the surface of the workpiece, directly measure the thickness of the substrate
10. The user can choose the measurement resolution in metric system x. XX and X.X, and in British system x. XX and X.X
11. Multi-language interface is optional
12. Standby time up to 35 hours
Technical parameters
|
Display |
2.4 inch TFT QVGA(320×240) color OLED screen with contrast ratio of 1010:1 |
|
working principle |
Ultrasonic pulse/echo/Echo method using double Crystal probe |
|
Measuring range |
0.5 to 508 mm (0.025 to 20.00 in) |
|
Measurement resolution |
0.01 or 0.1mm(0.001 or 0.01in) |
|
Unit |
Millimeter or inch |
|
Display mode |
Thickness value mode, min/Max capture mode, difference/reduction mode |
|
V path correction |
Automatic V path correction compensates for the nonlinearity of the twin probe |
|
Measurement update rate |
Optional 4HZ, 8HZ, or 16HZ per second |
|
Material speed range |
500-9999m/s,0.0179-0.3937in/u |
|
Working language |
Chinese/English/French (optional) |
|
Alarm set |
Max/min alarm, dynamic change thickness reading color when alarm |
|
Power supply |
Two 1.5V AA batteries |
|
Operating time |
Two AA batteries, more than 35 hours of service |
|
The instrument to turn it off |
Optional Automatic shutdown after no operation is performed for 5, 10, or 20 minutes, or manual shutdown |
|
Size |
-10 to +50 ºC, up to 20 ºC with special requirements |
|
Weight |
153mm×76mm×37mm(H×W×D) |
|
Shelf life |
Contain battery 280g |
|
Warranty |
12 Months |
Standard delivery
Main unit TG-5100D
Probe with cable
Couplant
Carrying case
Instruction manual
Calibration certificate
Optional accessories
|
High temperature probe |
Cast iron probe |
|
Narrow tube probe |
Miniature probe |
|
Probe cable |
Step block |
|
Rubber Sheath |
|
Probe with measuring range
|
Probe described |
Frequency(MHZ) |
Contact area Diameter |
Measuring range (In steel) |
Allowed Contact Temperature |
|
Cast iron probe ZT12 |
2 |
16.2mm |
(4.0~508.0)mm |
(-10~60)ºC |
|
Standard probe PT12 |
5 |
13.5mm |
(1.2~200.0)mm |
(-10~60)ºC |
|
Standard probe PT08 |
5 |
11mm |
(0.8~100.0)mm |
(-10~60)ºC |
|
Standard probe TC510 |
5 |
13.5mm |
(1.0~270.0)mm |
(-10~70)ºC |
|
Small crystal tube probe PT06 |
7.5 |
8mm |
(0.8~30.0)mm |
(-10~60)ºC |
|
Miniature probe PT04 |
10 |
6mm |
(0.7~12.0)mm |
(-10~60)ºC |
|
High temperature probe |
5 |
14mm |
(4.0~80.0)mm |
Below 480ºC |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.