Alternating Current Field Measurement (ACFM) Detection of Surface and Near-Surface Defects in Metal Structures
Alternating Current Field Measurement (ACFM) Detection of Surface and Near-Surface Defects in Metal Structures
Applicable Materials--Ferromagnetic and non-ferromagnetic conductive metals, including carbon steel, stainless steel, aluminum,etc
Application Scope--Detection of surface and near-surface defects in metal structures
Applicable Defects---Capable of effectively detecting surface cracks and other linear defects
Inspection Depth---Maximum depth for carbon steel is 3mm; for stainless steel is 5mm; for aluminum is 8mm
Detection Stability---Minimum defect detection rate greater than 90%
Permissible Coating Types---Non-conductive coatings such as paint,epoxy resin, asphalt, etc
|
Scope of Supply |
|
|
Equipment Name |
Intelligent Allernating Current Field Measurement(ACFM) |
|
Quantity |
1 set |
|
Main Inspection Capabilities |
|
|
Applicable Materials |
Ferromagnetic and non-ferromagnetic conductive metals, including carbon steel, stainless steel, aluminum, etc. |
|
Application Scope |
Detection of surface and near-surface defects in metal structures |
|
Applicable Defects |
Capable of effectively detecting surface cracks and other linear defects |
|
Inspection Depth |
Maximum depth for carbon steel is 3mm; for stainless steel is 5mm; for aluminum is 8mm |
|
Detection Sensitivity |
Capable of detecting surface-opening defects as small as 3*0 .5*0.2mm;can detect defects equivalent to those on Magnetic Particle Inspection (MPI) A1 15/100 test piece |
|
Detection Stability |
Minimum defect detection rate greater than 90% |
|
Permissible Coating Types |
Non-conductive coatings such as paint, epoxy resin, asphalt, etc |
|
Permissible Coating Thickness |
Maximum coating thickness ≤5mm; when used with a large coil probe, can inspect coatings up to 10mm thick |
|
Scanning Speed |
Maximum scanning speed ≤ 60mm/s, minimum scanning speed should be > 5mm/s |
|
Can perform inspections at temperatures up to 500°C when paired with a high--temperature probe |
|
|
Instrument Requirements |
|
|
Display |
7-inch multi-touch display with backlight support |
|
Resolution |
High-definition display, resolution 1280*800 |
|
RAM |
4GB, expandable to 8GB |
|
Storage |
32GB internal storage,expandable up to 128GB |
|
Operating System |
Android OS(based on Linux kernel) |
|
Interfaces |
1*USB3.0/USB2.0 HOST port, 1*Type-C port (charging only) |
|
Network Interface |
Supports Wi-Fi connection; expandable to support 4G dongle |
|
Charging Interface |
Type-C port, integrated with FCP input/output fast charging protocol, AFC input/output fast charging protocol, DRP Try. SRC protocol, PD3.1 input/output fast charging protocol, QC2.0/QC3.0/QC3.0+ output fast charging protocol |
|
Maximum Charging/Discharging Power:45W |
|
Basic Configuration
Host Unit: 1unit
Signal Acquisition and Analysis Software:1 set
Pencil Probe:1 unit
Standard Probe (with encoder):1 unit
Probe Connection Cable:1 unit
Charger:1 set
Product User Manual:1 set
Quality Documentation: 1 set
Instrument Case:1 set
Three-Element Array Probe: Optional
Instrument Requirements
Maximum Operating Time:16 hours
Host Dimensions:225mm* 172mm*76mm
Weight:<2.1kg
Operating Temperature:-10° C to 40°C
Operating Humidity:<90% relative air humidity
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.