Metric Imperial Ultrasonic Calibration Blocks in 1018 Carbon Steel Stainless Steel - 25x100x300mm to 50x75x305mm Sizes
Price:
Negotiable
MOQ:
1 pc
Delivery Time:
3-7 days,V1 and V2 have stock
Brand:
HUATEC
Product Description
Ultrasonic Calibration Blocks for NDT Testing
High-precision metric and imperial calibration blocks manufactured from 1018 carbon steel and stainless steel for ultrasonic testing equipment calibration and verification.
Product Specifications
| Order Code | Image | Type | Description/Application | Standard | Material Size |
|---|---|---|---|---|---|
| V1 |  |
A2 (BS) | IIW Calibration Standard for shear and compression wave probes. Checks beam angle, emergent point, resolution. Calibrates time base and gain settings. | B.S. 2704, DIN 54120, IIW | Steel 25x100x300mm |
| V1/50 |  |
A2 (BS) | Similar to V1 with thicker block to minimize side wall echoes. | BS 2704 | Steel 50x100x300mm |
| V2 |  |
A4 (BS) | Small calibration block for site checking of shear wave probes, time base and gain. 1.5mm or 5mm diameter hole target. | BS 2704, IOW | Steel 12.5x43x75mm |
| V2/20 |  |
A4 (BS) | Similar to V2 with thicker block to eliminate side wall echoes. 1.5mm or 5mm diameter hole target. | BS 2704 | Steel 20x43x75mm |
| BCB |  |
A5 (BS) | Beam Calibration Block for beam profile and resolution checks for shear wave probes. Sensitivity checks for shear and compression probes. 9 off 1.5mm holes. | BS 2704 | Steel 50x75x305mm |
| A6 |  |
A6 (BS) | Evaluating dominant frequency, pulse length, dead zone and resolving power for shear and compression probes as BS4331 part 3, 1974. | BS 2704 | Steel 25x50x150mm |
| RTB |  |
A7 (BS) | Checking shear wave probe resolution as BS4331 part 3, 1974. Steps of 2, 3, 4 and 5mm. | BS 2704 | Steel 74mm radius 75mm thick |
| LSW |  |
SPECIAL | Ladder step wedge for timebase calibration with thickness measuring compression probes. 8 steps from 1mm to 8mm. | Tolerance of +0.000mm -0.040mm | Steel 8x15x120mm |
| LSW/M |  |
SPECIAL | Similar to LSW with 15mm diameter steel inserts mounted in plastic. 8 steps from 1mm to 8mm. | Tolerance of +0.000mm -0.040mm | Steel inserts, Plastic body 10x20x140mm |
| CSW |  |
SPECIAL | Curved Step wedge for timebase calibration of thickness measuring probes. 5 steps - 2, 4, 6, 8 and 10mm. | Tolerance of +0.000mm -0.040mm | Steel 100mm long x 30mm I.D. Quadrant |
| MU |  |
SPECIAL | Metric Universal Block for general purpose checking as V1 block. | Tolerance of 0.1mm | Steel 20x50x150mm |
| TBR 2 125 (3) |  |
SPECIAL | Radiused test block for calibration of boiler probes. 3 off 1.5mm holes. | Tolerance of 0.004 inch | Steel 20x25x165mm |
| TBR 2 125 (5) |  |
SPECIAL | Similar to TBR 2 125(3) - supplied with 5 off 1.5mm holes | Tolerance of 0.004 inch | Steel 20x25x165mm |
| A5 Blank Type B |  |
ESI | Determination of signal curve and beam characteristics of single crystal probes (longer range). 1.6mm diameter hole. | ESI 98-7 | Steel 50x75x305mm |
| A5 Blank Type C |  |
ESI | Determination of signal curve and beam characteristics of single crystal probes (longer range). 1.6mm diameter hole. | ESI 98-7 | Steel 50x75x305mm |
| ESI-BCB N-A5 |  |
ESI | Checking twin crystal probes for sensitivity. Contains four additional 1.5mm diameter holes to A5 block. | ESI 98-2 | Steel 50x75x305mm |
| 50 RAD |  |
ESI | Checking pulse shape of shear wave probes. | ESI 98-2 and ESI 98-8 | Steel 50x75x150mm |
| ASME |  |
ASME | Setting sensitivity levels for weld testing. Sizes and locations of flaws are dependent on weld thickness. | ASME Article 5 Fig T-546.1 | Steel Size dependent on weld thickness |
| ASME/M |  |
SPECIAL (ASME) | Metric equivalent of ASME block. | Tolerance of 0.1mm | Steel Size dependent on weld thickness |
| DAC |  |
SPECIAL | Setting DAC characteristics for shear wave and compression wave probes. Flaws typically 1.5mm diameter holes at 20%, 40%, 60% and 80% of thickness. | Tolerance of 0.0004 inch | Steel Size dependent on product thickness |
Key Applications
- Calibration of shear and compression wave ultrasonic probes
- Beam angle, emergent point and resolution verification
- Time base and gain setting calibration
- Weld testing sensitivity level establishment
- Pulse shape and beam profile analysis
- NDT equipment performance validation
Available Block Types
IIW V1, IIW V2, DAC, ASME, DC BLOCK, SC BLOCK, DSC BLOCK, 4 STEP BLOCK, 5 STEP BLOCK, MAB MINIATURE ANGLEBEAM CALIBRATION BLOCK, IOW BEAM PROFILE BLOCK, AWS RESOLUTION BLOCK, MINIATURE RESOLUTION BLOCK, 30 FBH RESOLUTION BLOCK, ASTM DISTANCE AREA AMPLITURE SET, ASTM SINGLE BLOCK, ULTRASONIC CALIBRATION BLOCKS, ULTRASONIC REFERENCE STANDARD, 2 NOTCH TUBE STANDARD, 2 NOTCH PIPE STANDARD, API REFERENCE STANDARD, LONGITUDINAL WAVE WEDGE, CIRCUMFERENTIAL SHEAR WAVE WEDGE, EDDY CURRENT CALIBRATION STANDARD, MAGNETIC PARTICLE STANDARD, ASTM E709 MIL STD 271F, LIQUID PENETRANT STANDARD, IIW TYPE 1 BLOCK, IIW TYPE 2 BLOCK, ASTM E317, ASTM E1158, BASIC NOTCH SHAPES, HOLES, FLAT BOTTOM HOLE, ULTRASONIC TEST BLOCK
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HUATEC GROUP CORPORATION
Location
7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Contact Person
Ms. Shifen Yuan