Big Diameter Light Pole Welding Machine Gantry Type Shut Welding

Information:

The Machine Is The Special Equipment To Make High Poles And Electric Power Pole.

It Combined By Walking Motor To Drive Commissure Points To Seam And Under

The Manual Spot Welding, It Has High Efficiency.

The machine adopt submerged arc welding, the welding power is from Shangha iwelding

company, the welding is continuous and beautiful, strong penetration, forming one time ,

high efficiency. The speed is 1-3m/min. is the three time to gas welding. It’s the best

machine with fastest welding speed, good effect and lowest price.

introduction:

Power pole / High mast pole normally is assembed with 2 ~4pcs plate. production

procedure is spot welding to assemble into pole shape. and the Gantry Type Welding

will use submerged welder to weld seam for times. for so big pole, welding seam shall

penetrate completely through the plate thickness to get enough strength. and welding

outlook shall be nice, because the big pole normally used for city or surbub area.

Technical data:

Configuration:

travel driving motor :YDS100-4 low speed motor 1 set

welding lifting choose SCWS-08-1.1W deceleration machine 1 set

flux recovery fitting 1 set, powder bucket 1 set, suction 1 piece, sucker 1×5m

submerged arc welding machine 1 set

power cord 3×16m㎡,60m

arc guidance 1 sets(including welding gun)

cable movement pulley

electrical apparatus box 1 set control box 1 set

Technical documents:

Whole machine foundation drawing

machine instructions (electrical appliance diagrams,

line hanger

drawing, V frame drawing)

packing list

Parts supplied by buyer:

24Kg track40m

Make base according to supplied information

Gliding wire frame

welding V frame or roller frame

lubrication for deceleration machine (machine oil 20#)

 
Machine photo: