High Gloss BOPP Based Thermal Lamination Film 43 Micron Double Side Treatment
High Gloss Lamination Film BOPP Based Thermal Lamination Film
Glossy Specifications:
TYPE | THICKNESS (micron) | ||
GLOSSY | TOTAL | FILM BASE | EVA GLUE |
17 | 12 | 5 | |
18 | 12 | 6 | |
20 | 12 | 8 | |
22 | 12 | 10 | |
23 | 15 | 8 | |
25 | 15 | 10 | |
27 | 15 | 12 | |
30 | 15 | 15 | |
42 | 28 | 14 | |
WIDTH (mm) | 200 ~ 2200 | ||
LENGTH (m) | 100 ~ 4500 | ||
PAPER CORE | 25.4mm(1 inch) / 76mm (3 inch) | ||
BONDING | ≤2 | ||
CORONA TREATED | Double side | ||
SURFACE TENSION | 38 Dyne/cm ≤ 42 Dyne/cm | ||
LAMINATION TEMP. | 90±10°C | ||
ROLLER PRESSURE | 10 ~ 20Mpa | ||
LAMINATION SPEED | 20 ~ 70M | ||
Description:
Hot-laminated films have an extruded coated surface with low-temperature molten resin that can be laminated onto paper products by heat and pressure. Various surface treatments add value to printed surfaces. The glossy BOPP thermal laminated film provides a shiny colored finish. Its use can enhance the appearance and extend the life of all laminators.
A combination of good performance characteristics and low price point make BOPP thermal laminating films ideal for all kinds of printed & unprinted paper and paper boards, including book covers, cosmetics packaging, magazines, documents, shopping bags, Diaries, maps etc.
The Advantages Of NEI BOPP Composite Film VS Cold Coating Film
- Environmental protection
- Safe operation
- Excellent performance
- Easy to operate
- High efficiency
- Wide adaptability
NEI Quality Control
- Compared with other thermal lamination film, our EVA glue is 100% imported from Korea and it ensures the adhesiveness of our film.
- Professional quality control team.
- Professional workers with more than 10 years experiences.
Special Instruction:
1. It is recommended that NEI smooth biaxially oriented polypropylene thermal laminate film be laminated at a roller temperature range of 85 to 110°C and a roll press of 10 to 20 Mpa. However, the optimal conditions depend on the speed and dimensional stability of the selected laminator.
2. It is advised that the printed surface is well dried before lamination and cools sufficiently one surface before laminating to other surface.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.