Glossy Finish 17mic BOPP Thermal Lamination Film Ideal For Paper Lamination

Price Negotiable

Price: Negotiable

MOQ: ONE PALLET

Delivery Time: 15 working days for one 20GP Container

Brand: NEi

Product Description

BOPP Thermal Lamination Film,focus on clarity and adhesion,17mic

Specifications of BOPP Plastic Film:

TYPE	THICKNESS (micron)
Gloss	TOTAL	BASE	EVA
	15	10	5
	17	12	5
	18	12	6
	20	12	8
	22	12	10
	23	15	8
	25	15	10
	27	15	12
	28	15	13
	30	15	15
	42	18	24
WIDTH (mm)	200 ~ 2210
LENGTH (m)	100 ~ 8000
PAPER CORE	25.4mm(1 inch) / 76mm (3 inch)
BONDING	≤2
CORONA TREATED	Double side
SURFACE TENSION	38 Dyne/cm ≤ 42 Dyne/cm
LAMINATION TEMP.	90±10°C
ROLLER PRESSURE	10 ~ 20Mpa
LAMINATION SPEED	20 ~ 70M

Description of BOPP Plastic Film:

The surface of the thermolaminated film is coated with low-temperature molten resin extrusion, and the film can be laminated to the paper product by heat and pressure. A variety of surface treatments can add value to printed surfaces. Gloss pearly white BOPP thermal laminate film provides gloss to print surface. Compared with the subphotothermal laminate film, the gloss film can be stored for a longer time.

Pearly white BOPP thermal aminating film with good performance and low price is ideal for all kinds of printed and unprinted paper and board, including book covers, cosmetic packaging, magazines, documents, shopping bags, diaries and more.

Why chooses NEI Pearl White BOPP Plastic Film?

Environmentally friendly:It is environmentally friendly,non-hazardous to health and safe to use as no toxic gases or volatile content is emitted.Safety in laminating process as no solvent based adhesive is used.
High function: Compared with other solvent lamination, our film is better in clarity and bonding. Strong ability of absorbing powder, It prevents lamination from being pressed, bubbled and shredded off easily. Matt thermal lamination film is good for spot UV and hot stamping.
Easy handling:It is easy to operate once the required temperature is met and no special technique required.
Efficient and energy-saving: Production cost is reduced substantially as there is no film wastage, mixture of adhesive solvent, and no UV heating lamp is required.
Adaptable to different kinds of machines: This film is recommended to be used in dry laminator. Small adjustments need to be made to the machine if the film is used in wet laminator.

Special Instruction of BOPP Plastic Film:

NEI BOPP Thermal laminate Gloss film The recommended laminate roll temperature range is 85 to 110°C and roll pressure is 10 to 20Mpa. However, the optimal conditions depend on the speed and dimensional stability of the laminator chosen.
It is recommended that the printed surface be completely dry before laminating, and that one surface be sufficiently cooled before laminating onto other surfaces.