Pitch 7.92mm PCB Wire To Board Connectors Single Row 2 Pin Housing Lock For TV Set
Pitch 7.92mm Pcb Connectors Wire To Board Single Row 2 Pin Housing Lock For TV Set
1. Product Informations:
Housing Material: Nylon 66, UL 94-V0,
Housing color: White/Black/yellow
Housing Pin NO.: 2Pin,single row ; P/N:A3961H-02P-2
Terminal Material: Brass,(P/N:A3961-TBE);Phosphor Bronze(P/N:A3961-TPE),
Terminal E-stamping before Tin-plated.
Terminal Wire Range: AWG#18--#22, Insulation O.D.: 3.0mm(max). Qty/Reel:4000pcs.
2. Specifications:
Current Rating: 7A AC,DC
Voltage Rating: 250V AC, DC
Tenperature Range: -25ºC--+85ºC
Contact Resistance:5MΩ Max
Insulation Resistance: 1000MΩ Min
Withstanding Voltage: 1500V AC/minute
3. Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw actuator at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#16 | 10.2 kgf (Min.) |
| AWG#18 | 8.16 kgf (Min.) | |||
| AWG#20 | 6.12 kgf (Min.) | |||
| AWG#22 | 4.08 kgf (Min.) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50 kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 3.00 kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial pull out force at the speed rate of 25±3mm / minute. | 3.00 kgf (Min.) | |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 20mΩ (Max.) | |
| 5-7 | Vibration |
Amplitude: 1.5mm P-P |
Appearance No Damage. |
|
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
4. Environmental Performance And Others
| Test Description | Procedure | Requirement | |
| 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) |
| 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) |
Appearance No Damage. |
| 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | |
| 6-4 | Humidity |
Temperature: 40±2℃ |
Appearance No Damage. |
| 6-5 | Temperature Cycling |
5 cycles of: |
Appearance No Damage. |
| 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B) | |
| 6-7 | SO2 Gas |
24 hours exposure to 50±5ppm. |
|
| 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | |
| 6-9 | Solder-ability |
Soldering Time: 5±0.5 sec. |
Solder Wetting 95% of immersed area must show no voids, pin holes |
| 6-10 | Resistance to Soldering Heat |
Solder pot method |
Appearance No Damage. |
5. Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits | At Initial | |
| Insertion (Max.) | Withdrawal (Min.) | |
| Single | 2.5 | 0.20 |
| 02 | 5.0 | 0.40 |
6. Drawing:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.