wire to board connector, 1.0mm pitch CI14 crimping wire housing with lock for PCB connector
1, Specification details for your reference
| Basic size information | |||
| Circuits | from 2pins to 20pins | ||
| Suitable terminals | A1005T series | ||
| Mating lock | with | ||
| Wire range | AWG28# to 32# | ||
| Wire Insulation Diameter | 0.80mm max. | ||
| Part No. | A1005HA-04P or A1005HA-06P | ||
| Electrical properties | |||
| Current Rating | 1A AC, DC | ||
| Voltage Rating | 50V AC, DC | ||
| Contact Resistance | 20mΩ Max | ||
| Insulation Resistance | 100mΩ min | ||
| Withstanding Voltage | 500V AC/minute | ||
| Mechanical properties | |||
| Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | |||
2, Related drawing and report
6. Environmental Performance And Others
| Test Description | Procedure | Requirement | |
| 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) |
| 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) |
| 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | |
| 6-4 | Humidity |
Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) Insulation Resistance 10MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 |
| 6-5 | Temperature Cycling |
5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) |
| 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B) | |
| 6-7 | SO2 Gas |
24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. |
|
| 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| 6-9 | Solderability |
Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃ |
Solder Wetting 95% of immersed area must show no voids, pin holes |
| 6-10 | Resistance to Soldering Heat |
When reflowing Refer to paragraph 8 Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ |
Appearance No Damage. |
7. Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits | At Initial | Circuits | At Initial | ||
| Insertion (Max.) | Withdrawal (Min.) | Insertion (Max.) | Withdrawal (Min.) | ||
| 02 | 2.00 | 0.20 | 12 | 5.00 | 0.50 |
| 03 | 2.00 | 0.20 | 13 | 5.00 | 0.50 |
| 04 | 2.00 | 0.20 | 14 | 6.00 | 0.60 |
| 05 | 3.00 | 0.30 | 15 | 6.00 | 0.60 |
| 06 | 3.00 | 0.30 | 16 | 6.00 | 0.60 |
| 07 | 3.00 | 0.30 | 17 | 7.00 | 0.70 |
| 08 | 4.00 | 0.40 | 18 | 7.00 | 0.70 |
| 09 | 4.00 | 0.40 | 19 | 7.00 | 0.70 |
| 10 | 4.00 | 0.40 | 20 | 8.00 | 0.80 |
| 11 | 5.00 | 0.50 | |||
3, Our service
Customizable specification drawing and material is avaiable.More than 12 years experience in conenctor, wire housing, wafer, etc. products samples is free, you just need pay for the freight. Because we have strict quality control systerm, so we are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth,BYD, LuXshare,etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.