1.5mm Pitch Battery Connectors with Tin-plated terminals 6 Poles Crimp Wire to Board Connector
1, Specification of the product
| Basic size information | |||
| Flammability | UL94V-0 | ||
| Terminal material | phosphor bronze; gold-flashed | ||
| Row | Single | ||
| Material | Nylon66 | ||
| Wire Insulation Diameter | 1.20mm Max. | ||
| Part No. | A1505H-06P | ||
| Electrical properties | |||
| Current Rating | 3A AC, DC | ||
| Voltage Rating | 50V AC, DC | ||
| Contact Resistance | 20mΩ Max | ||
| Insulation Resistance | 500mΩ min | ||
| Withstanding Voltage | 500V AC/minute | ||
| Mechanical properties | |||
| Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | |||
2, Related drawing and report
Wish the following drawing & test report can help you to get our right parts.
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#24 | 1.5kgf (Min) |
| AWG#26 | 1.0kgf (Min) | |||
| AWG#28 | 0.8kgf (Min) | |||
| AWG#30 | 0.5kgf (Min) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.00kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 0.80kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.30kgf (Min.) | |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) | |
| 5-7 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits | At Initial | |
| Insertion (Max.) | Withdrawal (Min.) | |
| Single | 0.30 | 0.10 |
| 04 | 1.70 | 0.30 |
| 05 | 2.15 | 0.40 |
| 06 | 2.60 | 0.50 |
| 07 | 3.05 | 0.60 |
| 08 | 3.50 | 0.70 |
| 09 | 3.95 | 0.80 |
| 10 | 4.50 | 0.90 |
| 11 | 4.95 | 1.00 |
| 12 | 5.50 | 1.10 |
3, Our service
Please kindly check the following informaion, it will help you to pay money and get right parts in a short time.
- Payment Terms: Paypal, Western Union, Money Gram, T/T
- Warranty: 100% quality tested, 12 months guarantee, 1:1 replacement for faulty goods, defective rate<1%
- Lead Time: 3-7 working days for normal orders
- Shipping: express or by sea
- Free sample order and customized designs are available.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.