1A AC / DC Wire To Board SMT Wafer Connector 2PIN - 16PIN 1.25mm Pitch
1.25mm pitch 180 degree vertical DIP wafer connector with phosphor bronze tin-plated pin
1, The specification details of product
For this part, we also can offer the related housing, terminals to you. If you need it, we can
sell it to you as a set, then you can make your purchase cost down.
| Basic size information | |||
| Color | Yellow | ||
| Material | Nylon 6T | ||
| Pitch | 1.25mm | ||
| Flammability | UL94V-0 | ||
| Panel mount | Yes | ||
| Circuits | 2 to 16pins | ||
| Terminal material | Phosphor bronze, tin-plated finish | ||
| Electrical properties | |||
| Current Rating: | 1A AC, DC | ||
| Voltage Rating | 125V AC, DC | ||
| Contact Resistance: | 20mΩ Max | ||
| Insulation Resistance: | 100mΩ min | ||
| Withstanding Voltage: | 500V AC/minute | ||
| Mechanical properties | |||
| Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | |||
3, Application fied of these product
This product is developed for PDP, LCD, or small electronics equipment. You can have an intuitive understanding of it. Famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc are glad to buy our part for their new models, and we have good business relation ship. BTW, all product from us are certificated by REACH, UL, RoHS. In order to protect the evironment, some parts are halogen free.
4, Main testing data
5. Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) |
| AWG#30 | 0.8kgf (Min) | |||
| AWG#32 | 0.5kgf (Min) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 0.50kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.50kgf (Min.) | |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) | |
| 5-7 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.