2.5mm Pitch SCN connector Wire to Board Crimp Connectors Crimp style, Board-in connector
Max 16 Position Printed Circuit Board Connectors 2.50mm With 180 Degree Angle
1, Details of product description
| Basic size information | |||
| Suitable terminals | B2512V series | ||
| Color | light-yellow | ||
| Pitch | 2.5mm | ||
| Contacts type | one | ||
| PC board mounting direction | top entry | ||
| Circuits | 2 to 16pins | ||
| Wire insulation diameter | 1.70mm Max. | ||
| Electrical properties | |||
| Current Rating | 3A AC, DC | ||
| Voltage Rating | 250V AC, DC | ||
| Contact Resistance | 10mΩ Max | ||
| Insulation Resistance | 1000mΩ min | ||
| Withstanding Voltage | 800V AC/minute | ||
| Mechanical properties | |||
| Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | |||
2, Related drawing and report
Folllowing pictures are out testing report and exact engineering drawing for your information, please kindly check it, wish it can help you to get what you really need.
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force to P.C.B |
Insert and withdraw at the speed rate of 25±3mm / minute to P.C.Board. (Per single circuit,Initial) |
Insertion | 1.0kgf max. |
| Withdrawal | 0.3kgf min | |||
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#22 | 4.0kgf (Min) |
| AWG#24 | 3.0kgf (Min) | |||
| AWG#26 | 2.0kgf (Min) | |||
| AWG#28 | 1.0kgf (Min) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.00kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 1.50kgf (Min.) | |
| 5-5 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 10mΩ (Max.) | |
| 5-6 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 10mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
| 5-7 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
3, Application fied of these product
This multi-circuit board-in connector meets the needs for high-density mounting on PC boards efficiently and economically. Our parts are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, LuXshare, BYD etc because of its' low defetive rates. And the all products are complied with REACH, UL, RoHS standard. In order to protect the evironment, some parts are halogen free.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.