2.54mm Pitch Battery Connecor with Lock Bump Double Row Male Header Crimp Connectors
1, Detailed specification table of product
| Detailed information | ||||
Basic information | Type | Male | ||
| Circuits | From 2pins to 12 pins | |||
| Insulation O.D. | 1.70mm(Max) | |||
| Mating lock | With | |||
| Row | Double | |||
| Suitable Wafer | A2541W series wafer | |||
| Matched Terminals | A2541-T-M series | |||
| Electrical properties | Current Rating | 3A AC, DC | ||
| Voltage Rating | 250V AC, DC | |||
| Contact Resistance | 20mΩ Max | |||
| Insulation Resistance | 1000MΩ min | |||
| Withstanding Voltage | 1500V AC/minute | |||
| Mechanical properties | Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | ||||
2, Corresponding engineering drawing & test report
Below file is our engineering drawing and testing report for further information. It's sure that it will be a
good reference for you to know this series parts clearly. 
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#22 | 4.0kgf (Min) |
| AWG#24 | 3.0kgf (Min) | |||
| AWG#26 | 2.0kgf (Min) | |||
| AWG#28 | 1.0kgf (Min) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 2.00kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 1.50kgf (Min.) | |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) | |
| 5-7 | Vibration | Amplitude: 1.5mm P-P | Appearance No Damage. | |
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
3, Why Choose us
1). High Reputation: We are a professional & realiable electronics connector, wafer, termianl manufacturer with 12 years experience, who has owned high reputation in this field.
2). Famous Exhibition: We are active in attending Exhibitions, like China Sourcing Fair in HongKong. We've built up business with lots of clients from all over the world.
3). Visit us: Welcome to visit our factory facility, we will show you a competitive company with high quality & reasonable price.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.