Single Row 3.00mm Pitch Wire To Wire Connectors 43020 Micro-Fit 3.0 Receptacle Housing
pitch 3.0mm single row housing wire to wire connector PA66 black Mx43020 connectors
1, Detailed part information as below
| Basic information | |||
| Circuits | 2 to 12 positions | ||
| Pitch | 3.0mm | ||
| Mating lock | With | ||
| Material | PA66, UL94V-0/2 | ||
| Panel Mount | No | ||
| Row No. | Single | ||
| Insulation O.D. | 1.85mm(Max) | ||
| Matched termial materials | phosphor bronze | ||
| Finish terminal | Tin-plated or gold-flash | ||
| Electrical properties | |||
| Current Rating | 5A AC, DC | ||
| Voltage Rating | 250V AC, DC | ||
| Contact Resistance | 10mΩ Max | ||
| Insulation Resistance | 1000mΩ min | ||
| Withstanding Voltage | 1500V AC/minute | ||
| Mechanical properties | |||
| Temperature range | -25℃ to 85 ℃ | ||
| Terminal Insertion Force | 1.50kgf (Max.) | ||
| Terminal/Housing Retention Force | 2.50kgf (Min.) | ||
| Pin Retention Force | 1.50kgf (Min.) | ||
| Latch Yield Strength | 7.00kgf (Min.) | ||
| Other information please kindly check the following picture. | |||
2, Introduction for this series products
Please kindly notice that the C3030 series product, you can buy it as a set, then we will offer you reasonable price.
| C3030 series product | ||
| Terminal | C3030F-T-A and C3030M-T | |
| Connector | Male housing | C3030HF-NP & C3030HF-2XNP &C3030HFA-2XNP |
| Female housing | C3030HM-NP & C3030HMA-NP &C3030HM-2XNP & C3030HMA-2XNP | |
|
Wafer |
Vertical type | C3030WV-F-NP &C3030WV-F-2XNP |
| Right angle type | C3030WR-F-XP & C3030WR-F-2XNP | |
3, Corresponding engineering drawing & testing report
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#20 | 6.0kgf (Min.) |
| AWG#22 | 4.0kgf (Min.) | |||
| AWG#24 | 3.0kgf (Min.) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 2.50kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 1.50kgf (Min.) | |
| 5-6 | Latch Yield Strength |
Mate connectors and pull apart until both latches break at the speed rate of 25±3mm / minute |
7.00kgf (Min.) | |
| 5-7 | Panel Mount Retention Force | Insert the housing into panel cut out, barbs break at the speed rate of 25±3mm / minute. |
Single Row(W-W) 8.0kgf (Min.) Dual Row(W-W) 16.0kgf (Min.) |
|
| 5-8 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 20mΩ (Max.) | |
| 5-9 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 20mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
| 5-10 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
4, Applicated field of this product
This product are widely used in household appliance, computer, telecommunications device. Our parts
have very good performance in signal and current transmission. So it's accepted by some famouse company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth,BYD, LuXshare and more. You
can know this easily from attached pictures.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.