3.00mm Pitch Wire To Wire Connector Right Angle Header With Snap In PCB Lock
1, Detailed specification of product:
| Detailed information | ||||
|
Basic information |
Type | Wafer connector | ||
| Gender | Female | |||
| Circuits | 2 to 12 positions | |||
| Insulation O.D. | 1.85mm(max) | |||
| Mating lock | With | |||
| Pin materials | Brass or tin-plated | |||
| Wafer material | PBT,UL94V-0 | |||
| Matched housing | C3030HF single row series | |||
| Mounting type | Right angle(90 degree) | |||
| Application | Power, wire to wire | |||
| Terminal materials | Phosphor bronze | |||
| Finish terminal | Tin-plated or gold-flash type | |||
| Terminal Package | 10K pcs/reel | |||
| Terminal processing method | E-stamping before tin-plated | |||
|
Electrical properties |
Current Rating | 5A AC, DC | ||
| Voltage Rating | 250V AC, DC | |||
| Contact Resistance | 10mΩ Max | |||
| Insulation Resistance | 1000MΩ Min | |||
| Withstanding Voltage | 1500V AC/minute | |||
|
Mechanical properties |
Temperature range | -25℃ to 85 ℃ | ||
| Terminal Insertion Force | 1.50kgf (Max.) | |||
| Terminal/Housing Retention Force |
2.50kgf (Min.) |
|||
| Pin Retention Force | 1.50kgf (Min.) | |||
| Latch Yield Strength | 7.0kgf (Min.) | |||
| Other information please kindly check the following picture. | ||||
2, Introduction for this series products
Please kindly notice that the C3030 series product, you can buy it as a set, then we will offer you reasonable price.
| C3030 series product | ||
| Terminal | C3030F-T-A and C3030M-T | |
| Connector | Male housing | C3030HF-NP & C3030HF-2XNP &C3030HFA-2XNP |
| Female housing | C3030HM-NP & C3030HMA-NP &C3030HM-2XNP & C3030HMA-2XNP | |
|
Wafer |
Vertical type | C3030WV-F-NP &C3030WV-F-2XNP |
| Right angle type | C3030WR-F-XP & C3030WR-F-2XNP | |
3,Corresponding engineering drawing & test report
Below file is our engineering drawing and testing report for further information. It's sure that it will be a
good reference for you to know this series parts clearly.
Drawing of dimension
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#20 | 6.0kgf (Min.) |
| AWG#22 | 4.0kgf (Min.) | |||
| AWG#24 | 3.0kgf (Min.) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 2.50kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 1.50kgf (Min.) | |
| 5-6 | Latch Yield Strength |
Mate connectors and pull apart until both latches break at the speed rate of 25±3mm / minute |
7.00kgf (Min.) | |
| 5-7 | Panel Mount Retention Force | Insert the housing into panel cut out, barbs break at the speed rate of 25±3mm / minute. |
Single Row(W-W) 8.0kgf (Min.) Dual Row(W-W) 16.0kgf (Min.) |
|
| 5-8 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 20mΩ (Max.) | |
| 5-9 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 20mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
| 5-10 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits | At Initial | Circuits | At Initial | ||
| Insertion (Max.) | Withdrawal (Min.) | Insertion (Max.) | Withdrawal (Min.) | ||
| Single | 0.50 | 0.20 | 10 | 6.80 | 2.35 |
| 02 | 1.20 | 0.35 | 11 | 7.50 | 2.60 |
| 03 | 1.90 | 0.60 | 12 | 8.20 | 2.85 |
| 04 | 2.60 | 0.85 | 14 | 9.60 | 3.35 |
| 05 | 3.30 | 1.10 | 16 | 11.00 | 3.85 |
| 06 | 4.00 | 1.35 | 18 | 12.40 | 4.35 |
| 07 | 4.70 | 1.60 | 20 | 13.80 | 4.85 |
| 08 | 5.40 | 1.85 | 22 | 15.20 | 5.35 |
| 09 | 6.10 | 2.10 | 24 | 16.60 | 5.85 |
4, Why choose us
Our Quality: Quality is the life of HRT. We use only the best quality (original) materials to ensure the standard of our product. All products we sold out are strictly selected and tested by our QC department.
Warranty:We provide comprehensive after-sales service, including quality service, guidance services. We focus on customer needs in every detail. Please contact us if you have any question.
Payment:We accept payment via TT (Bank transfer), PayPal, Western Union, L/C. We accept bank transfer for large orders. For small order, it's better for you to pay via T/T or Western union.
Shipping:We offer as many shipping options as possible, including DHL, UPS, FedEx, TNT and EMS.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.