1.25mm Pitch Miniature Crimping Connector , UL Listed Lvds Display Connector
1, Detailed form of product specification
Features:
1. Miniature Size
2. Multi-contact
3. Correspond to Automatic Mounting
4. Integral Basic Function Despite Miniature Size
5. UL Certifled
Specifications:
Connector Type: Contact, Socket, Header, Others
Cable Assembly: No, Yes
Safety Standards: UL
Number of Positions: 2, 10, 11, 12, 13, 14, 15, 20, 30, 3, 40, 4, 5, 6, 7, 8, 9
Number of Rows (Interface): 1, 2
Mounting Pitch: 1.25 mm
Contact Pitch: 1.25 mm
Rated Current: 1 A
Rated Voltage (AC): AC 150 V
Mating/Unmating Cycles: 30, 50
Mounting Style: SMT, THT
Connector Orientation: Straight, Right angle
Mounting Side: Standard on-Board
Contact Plating: Gold, Tin, Tin-Copper
Wire Termination Method: Crimping
Recommended Wire Type: Discrete wire
Recommended Min. Wire Size (AWG): AWG 32, 30
Recommended Max. Wire Size (AWG): AWG 26, 30
Operating Temperature (Max.): 85 ℃
Operating Temperature (Min.) -35 ℃
Glow Wire Compliant: Yes
More characteristic of this part, please kindly check the following pictures. Wish you can get the right parts from our company. Thanks a lot!!!
2, Related drawing and report
6. Environmental Performance And Others
| Test Description | Procedure | Requirement | |
| 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) |
| 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) |
Appearance No Damage. Contact Resistance 60mΩ (Max.) |
| 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | |
| 6-4 | Humidity |
Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) |
Appearance No Damage. Contact Resistance 60mΩ (Max.) Insulation Resistance 50MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 |
| 6-5 | Temperature Cycling |
5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) |
Appearance No Damage. Contact Resistance 60mΩ (Max.) |
| 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B) | |
| 6-7 | SO2 Gas |
24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. |
|
| 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| 6-9 | Solderability |
Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃ |
Solder Wetting 95% of immersed area must show no voids, pin holes |
| 6-10 |
Resistance to Soldering Heat (DIP) |
Solder pot method Soldering time: 10±0.5 sec. Solder Temperature: 260±5℃ Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ |
Appearance No Damage. |
| 6-11 | Resistance to Soldering Heat (SMT) |
When reflowing Refer to paragraph 8 Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ |
Appearance No Damage. |
7. Actuator Insertion/Withdrawal Force
DIP&Single Row SMT [Unit : kgf] Dual Row SMT [Unit : kgf]
| Circuits | At Initial | Circuits | At Initial | |||
| Insertion (Max.) | Withdrawal (Min.) | Insertion (Max.) | Withdrawal (Min.) | |||
| Single | 0.30 | 0.03 | Single | 0.30 | 0.03 | |
| 02 | 2.00 | 0.50 | 2X05 | 3.50 | 0.90 | |
| 03 | 2.50 | 0.55 | 2X06 | 4.10 | 1.00 | |
| 04 | 3.00 | 0.60 | 2X07 | 4.70 | 1.10 | |
| 05 | 3.50 | 0.65 | 2X10 | 6.50 | 1.40 | |
| 06 | 4.00 | 0.70 | 2X15 | 9.50 | 1.90 | |
| 07 | 4.50 | 0.75 | 2X18 | 11.30 | 2.10 | |
| 08 | 5.00 | 0.80 | 2X20 | 12.50 | 2.40 | |
| 09 | 5.50 | 0.85 | 2X25 | 15.50 | 2.90 | |
| 10 | 6.00 | 0.90 | ||||
| 11 | 6.50 | 0.95 | ||||
| 12 | 7.00 | 1.00 | ||||
| 13 | 7.50 | 1.05 | ||||
| 14 | 8.00 | 1.10 | ||||
| 15 | 8.50 | 1.15 | ||||
3, Parts Application
This product are widely used in household appliance, computer, communication device. Because we can controll NPL ratio under 1.0%, so our parts are trusted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc. And the all products are certificated by REACH, UL, RoHS. Some parts are halogen free which is friendly to environment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.