Double Row Wire To Board Crimp Style Connectors Pin Header With 2.0mm Pitch Wire
Two Row LVDS Connectors Wire Housing A2016 Series Pin Header 2.0mm Pitch
1, The specification of the product like information of size, electrical and mechanical properties.
| Basic size information | |||
| Color | Black | ||
| Pitch |
2.00mm |
||
| Material | PBT(standard) | ||
| Nose No. of A2016H-2XNP | 0 | ||
| Nose No. of A2016H-N-2XNP | 1 | ||
| Nose No. of A2016H-3N-2XNP | 3 | ||
| Wire Termination Method | Crimping | ||
| Circuits | 4 to 60 pins | ||
| Wire Insulation Diameter | 1.30mm Max. | ||
| Mounting side | Standard on-Board | ||
| Terminals material | Phosphor bronze; gold-flash finish | ||
| Electrical properties | |||
| Current Rating | 2A AC, DC | ||
| Voltage Rating | 250V AC, DC | ||
| Contact Resistance | 20mΩ Max | ||
| Insulation Resistance | 1000mΩ min | ||
| Withstanding Voltage | 1000V AC/minute | ||
| Mechanical properties | |||
| Operating Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | |||
2, Related drawing and report
We wish our engineering drawing and report can help you to get the right parts from us easily.
without nose type
with one nose type
with 3 nose type
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#26 | 2.0kgf (Min) |
| AWG#28 | 1.0kgf (Min) | |||
| AWG#30 | 0.8kgf (Min) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.00kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 1.00kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 1.00kgf (Min.) | |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) | |
| 5-7 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
3, Why choose us?
1). High Reputation: We are a professional & realiable electronics connector, wafer, termianl manufacturer with 12 years experience, who has owned high reputation in this field.
2). Famous Exhibition: We are active in attending Exhibitions, like China Sourcing Fair in HongKong. We've built up business with lots of clients from all over the world.
3). Visit us: Welcome to visit our factory facility, we will show you a competitive company with high quality & reasonable price.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.