One Row Battery Terminal Connectors 3.96mm With Brass / Phosphor Bronze Side entry Housing
1, The product specification
Through the next datasheet, you will have a good understanding for our product. Besides, the interrelated
product of this part like terminals, wafer(right angle or vertical) can be offered by us too.
| Basic size information | |||
| Color | White | ||
| Material | Nylon66 | ||
| Row | Single | ||
| Pitch | 3.96mm | ||
| Flammability | UL94V-0 | ||
| Wire range | A3961T series | ||
| Terminal processing method | E-stamping before tin-plated | ||
| Part No. | A3961HA-NP | ||
| Electrical properties | |||
| Current Rating | 7A AC, DC | ||
| Voltage Rating | 250V AC, DC | ||
| Contact Resistance | 10mΩ Max | ||
| Insulation Resistance | 1000mΩ min | ||
| Withstanding Voltage | 1500V AC/minute | ||
| Mechanical properties | |||
| Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | |||
2, Related drawing and report
You can get more characteristics from below picture, through this, you can know our product very clearly.
Environmental Performance And Others
| Test Description | Procedure | Requirement | |
| 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) |
| 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) |
Appearance No Damage. Contact Resistance 20mΩ (Max.) |
| 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | |
| 6-4 | Humidity |
Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) |
Appearance No Damage. Contact Resistance 20mΩ (Max.) Insulation Resistance 1000MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 |
| 6-5 | Temperature Cycling |
5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) |
Appearance No Damage. Contact Resistance 20mΩ (Max.) |
| 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B) | |
| 6-7 | SO2 Gas |
24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. |
|
| 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits | At Initial | Circuits | At Initial | ||
| Insertion (Max.) | Withdrawal (Min.) | Insertion (Max.) | Withdrawal (Min.) | ||
| Single | 1.00 | 0.20 | 09 | 7.50 | 2.20 |
| 02 | 2.00 | 0.40 | 10 | 8.00 | 2.50 |
| 03 | 3.00 | 0.60 | 11 | 9.00 | 2.80 |
| 04 | 4.00 | 0.80 | 12 | 9.50 | 3.10 |
| 05 | 4.50 | 1.00 | 13 | 10.00 | 3.40 |
| 06 | 5.50 | 1.30 | 14 | 11.00 | 3.70 |
| 07 | 6.00 | 1.60 | 15 | 11.50 | 4.00 |
| 08 | 7.00 | 1.90 | |||
3, FAQ:
Q1: Are you manufacturer or trading company?
A: We are a manufacturer with 12 years experience professional manufacturing company which specializes in producing, research and development, sales of variety of electronic connectors, terminals, wafer etc.
Q2: How to control the quality of your products?
A: Quality is life of our company. The QC staff control each procedure as per ISO9001 program. All part are100% tested before shipping.
Q3: Where is your factory located, and how can we visit there?
A: Our company is located in Dongguan city, Guangdong Province, China. It is close to shenzhen
Q4: How can I get the sample?
A: The sample is for free,but the transportation fee will be beared by customers.
Q5: What are your products applied to?
A: Our products are applied to automotive use, conmmunication equipment, industrial use, household appliance, electronics, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.