2.54mm Pitch Shrouded Header Male Connector For Wire To Board Connector / Housing
1, Detailed specification table of product
| Detailed information | ||||
|
Basic information |
Type | Male | ||
| Circuits | 2 to 20 Circuits | |||
| Insulation O.D. | 1.70mm(Max) | |||
| Mating lock | With | |||
| Row | Double or Single | |||
| Order Code | A2541WV-NP, A2541WR-NP, A2541WR-2xNP | |||
| Matched Terminals | A2541-T-M series | |||
| Electrical properties | Current Rating | 3A AC, DC | ||
| Voltage Rating | 250V AC, DC | |||
| Contact Resistance | 20mΩ Max | |||
| Insulation Resistance | 1000MΩ min | |||
| Withstanding Voltage | 1500V AC/minute | |||
| Mechanical properties | Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | ||||
2, Corresponding engineering drawing & test report
Below file is our engineering drawing and testing report for further information. It's sure that it will be a
good reference for you to know this series parts clearly.
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#22 | 4.0kgf (Min) |
| AWG#24 | 3.0kgf (Min) | |||
| AWG#26 | 2.0kgf (Min) | |||
| AWG#28 | 1.0kgf (Min) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 2.00kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 1.50kgf (Min.) | |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) | |
| 5-7 | Vibration |
Amplitude: 1.5mm P-P |
Appearance No Damage. |
|
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits | At Initial | |
| Insertion (Max.) | Withdrawal (Min.) | |
| Single | 1.00 | 0.17 |
| 02 | 2.50 | 0.40 |
| 03 | 3.00 | 0.60 |
| 04 | 3.50 | 0.80 |
| 05 | 4.00 | 1.00 |
| 06 | 4.50 | 1.20 |
| 07 | 5.00 | 1.40 |
| 08 | 5.50 | 1.60 |
| 09 | 6.00 | 1.80 |
| 10 | 6.50 | 2.00 |
| 11 | 7.00 | 2.20 |
| 12 | 7.50 | 2.40 |
3, Why Choose us
1). We are in Donguan,the hometown of electronics parts in China. We can provide you the most competitive products.
2). We have sampling more than 8000 types of products for our custom in the past 12 years.
3).There is a a pool of experienced, sophisticated work of the top technical talent, and use of advanced automated production equipment, full assurance of the quality of the products.
4).Our customers are located all over the world including China,Singapore,Austrillia ,Korea, India, USA and many countries in Europe as well as Africa and South America.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.