MultiPort Extrusions / Microchannel Aluminum Extruded Tubes 1100 / 3003 / 3102
MultiPort Extrusions / Microchannel Aluminum Extruded Tubes 1100 / 3003 / 3102
1. Product Introduction:
The Aluminium Multi Port Extruded tubes,also called micro-channel aluminum tubes,are unique tubes developed with highly refined manufacturing quality. With their large internal surface area, they can achieve more efficient heat transfer and hence are widely used in highly effective heat exchangers.
2. The Aluminium Multi Port Extrusion (MPE) or microchannel tube is unique tube developed with the highest manufacturing quality and is characterized by the following properties:
1) Low weight
2) Excellent conductor of heat and electricity
3) High corrosion resistance
4) High recycling value
5) High surface quality
6) High pressure resistance
3. Commonly used material chemical composition
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 2 | 1100 | ≤0.95(Si+Fe) | 0.05-0.20 | ≤0.05 | --- | --- | ≤0.10 | --- | --- | |
| 3 | 3102 | ≤0.40 | ≤0.70 | ≤0.10 | 0.05-0.40 | --- | --- | ≤0.30 | --- | ≤0.10 |
| 4 | 3003 | ≤0.15 | ≤0.15 | ≤0.01 | 0.90-1.10 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.05 | ≤0.05 |
4. Supply state and mechanical properties
| Alloy | Temper | Tensile Strength | Yield Strength | Elongation |
|
1050 |
O/F/H111/H112 | ≥65MPa | ≥20MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
5. The corrosion resistance performance
Salt spray test ≥750hours
6. The pressure resistance performance
| Automobile Condensers | Household Condensers | Evaporators |
| ≥9MPa | ≥13.5 MPa | ≥3.5 MPa |
7. Beside increased global performances, an all-aluminium brazed heat exchanger using MPE will also present better corrosion resistance. MPEs are primarily used for the following applications:
1) Condensers
2) Evaporators
3) Oil coolers
4) Radiators
5) Heater cores
8. Equipment introduction:
| Production Line | Number | Equipment Details | Annual Output |
| Heat Extruding Line | 6 | 800T/one to one/ 1 set | 12000 Tons |
| 2000T/one to four/2 sets | |||
| 2500T/one to six/3 sets (Phase II) | |||
| Decoiling Cutting Line | 12 | Double Tubes | 10000 Tons |
| Tooling Center | 1 | Series devices | 5000 sets |
| Industrial Profiles Production Line | 1 | 1650T | 4500 Tons |
| Integrated Productivity | Micro channel aluminum flat tube: 12000 Tons | ||
| Industrial Profiles: 4500 Tons | |||
9. The Multi Port Extruded profiles are available in various sizes and alloys, ensuring the best properties for the purpose required.We could also produce the size as per our customers' design.
10. Package: Shipped in the form of coil or straight with fixed length.
11. Surface Treatment : With Zinc spraying or without Zinc spraying.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.