3003 Aluminum Extruded Tube 100-200mm Width For Heat Transfer
3003 Aluminum Extruded Tube 100-200mm Width For Heat Transfer
Product Introduction:
Micro-multiport extrusion aluminum tube (MPE tube) is mainly used for the production of heat exchangers. Due to its high corrosion-resistance & good heat conductivity, MPE tube is particularly well suited for the use in evaporators & condensers. MPE tube is required increased burst strength and better heat conductivity for an optimized product size. To meet the market requirement, we developed zinc-coated & flux coated MPE tubes, it can be supplied in the form of coils, or fixed length by non-cutting separation method.
The Micro-multiport extrusion aluminum tube (MPE tube) is unique tubes developed with the highest manufacturing quality and is characterized by the following properties:
1. Low weight
2. Good thermal and electricity conductivity
3. Good forming and bending capability
4. Good corrosion and pressure resistance
5. High recycling value
6. Narrow tolerance range
7. High surface quality
Our strength is based on three solid pillars:
1) Strong Mold R&D ability: our independent mold center, which enables to master the core technology with fast response, it not only meets customer's demands, but also ensures timely delivery.
2) High-quality product: We adopt the ISO9001:2000 quality management system.
3) Outstanding service: Providing technical support for the customers and aftersale service for the customer all around the world whenever they need.
Equipment introduction:
| Production Line | Number | Equipment Details | Annual Output |
| Heat Extruding Line | 6 | 800T/one to one/ 1 set 2000T/one to four/2 sets 2500T/one to six/3 sets (Phase II) |
12000 Tons |
| Decoiling Cutting Line | 12 | Double Tubes | 10000 Tons |
| Tooling Center | 1 | Series devices | 5000 sets |
| Industrial Profiles Production Line | 1 | 1650T | 4500 Tons |
| Integrated Productivity | Micro channel aluminum flat tube: 12000 Tons Industrial Profiles: 4500 Tons |
||
Typical Chemical composition:
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 2 | 1100 | ≤0.95(Si+Fe) | 0.05-0.20 | ≤0.05 | --- | --- | ≤0.10 | --- | --- | |
| 3 | 3102 | ≤0.40 | ≤0.70 | ≤0.10 | 0.05-0.40 | --- | --- | ≤0.30 | --- | ≤0.10 |
| 4 | 3003 | ≤0.15 | ≤0.15 | ≤0.01 | 0.90-1.10 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.05 | ≤0.05 |
Mechanical properties:
| Alloy | Temper | Tensile Strength | Yield Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥20MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
Surface Treatment : With Zinc spraying or without Zinc spraying.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.