Aluminum Extrusion Water Cooling Tubes For EV Lithium Ion Battery
Aluminum Extrusion Water Cooling Tubes For EV Lithium-Ion Battery
Description
At present, we are supplying Aluminum Extrusion Water Cooling Tubes For EV Lithium-Ion Battery For round batteries . To meet different customers' request , we also produce liquid cooling plate for battery pack. If you are looking for aluminum liquid water cooling coldplate for battery pack,We have full solutions for cooling the battery cells, such as snake cooling tubes for cylindrical cells (18650,21700,46800); aluminum water cooling coldplate for prismatic cells, and plate channel for pouches.
To provide max. lithium-ion battery life and optimum performance,advanced battery cooling and heating solutions regulate battery temperatures within their optimal operating range under all conditions by transferring heat from a battery cooling plate through a two-phase battery chiller.
Specification of snake tube
| No. | Item | Data |
| 1 | Name | Aluminum Extrusion Water Cooling Tubes For EV Lithium-Ion Battery |
| 2 | Alloy | 1050,1060,3003, |
| 3 | Temper | O,H12,H14 |
| 4 | Size | Customized as your requirement |
| 5 | Thickness | As your request |
| 6 | Application |
EV Battery or energy storage system |
| 7 | Benefit |
Low the energy cost, increase the electric vehicle energy kilograme |
Commonly used material chemical composition:
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 2 | 1100 | ≤0.95(Si+Fe) | 0.05-0.20 | ≤0.05 | --- | --- | ≤0.10 | --- | --- | |
| 3 | 3102 | ≤0.40 | ≤0.70 | ≤0.10 | 0.05-0.40 | --- | --- | ≤0.30 | --- | ≤0.10 |
| 4 | 3003 | ≤0.15 | ≤0.15 | ≤0.01 | 0.90-1.10 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.05 | ≤0.05 |
2,High frequency welding tube
3,Medium vapor chamber plate
4,Solar collector
5,Energy-storage vapor chamber
6,Shovel or extruded radiator
Features and Benefits
1. Tooling development — we do it in house, so we can make initial testing prompt and accurate.
2. Making all kinds of heat exchangers — we can do customized shape, to make the parts fit into different packs.
3. Assistance in parts design — we have experienced engineer team, they can provide professional suggestions regarding feasibility of carrying out new designs.
4. One station service — we can do heat exchangers, as well as its related insulation and silicon pad. So client can get
integrated solution.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.