Automobile Condenser Aluminum Extruded Tube Microchannel For Oil Cooler
Automobile Condenser Spare Parts Aluminum Extruded Microchannel Tube for Oil Cooler
Multiport Tube is an important spare part for auto condenser and evaporator.
Benefit from our own tooling center, lots of ready molds are with us.
Based on good channel flow design, coolant can run inside the tube and ensure high cooling efficiency.You can also design your own tube and send us the drawing through our sales representatives,we can do the Custom manufacturing based on your drawing.
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 1100 | ≤0.95(Si+Fe) | 0.05~0.20 | ≤0.05 | -- | -- | ≤0.10 | --- | --- | |
| 3102 | ≤0.40 | ≤0.70 | ≤0.1 | 0.05~0.4 | --- | --- | ≤0.3 | --- | ≤0.10 |
It can be customized according to customers' request!
Mechanical Properties
| Alloy | Temper | Tensile Strength | Yeild Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥200MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| Items | Range |
| Width | 8mm~40mm |
| Thickness | 1mm~5mm |
| Wall thickness | 0.15mm~0.8mm |
| Thickness of zinc spraying | 6g/mm²~15g/mm² |
| Fixed length | 200mm~4000mm |
| Number of pores | 3~30 |
It can be customized according to customers' request!
Applications:
Engine cooling and air conditioner system, such as radiator, condenser, oil cooler and heater, evaporator.
Home appliances electrics industries, such as HAVC heat exchangers, refrigerator, PTC heating unit, air conditioner;
New energy: Liquid cooling plate for EV battery / ESS battery.
FAQ:
Q: Are you a trading company or manufacturer?
A: Yes,we are a factory with more than 10 years history in this industry.
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new molds and free samples (within 5 kg),;after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.