Bar Code Waist Height Turnstiles Stainless Steel 25~30 Persons / Min Passing Speed
Galvanize TCP/IP One-way Access Control System Bar code waist Height Turnstile coin entrance barrier swing gates
Introduce of sliding turnstile gates :
Integrating mechanism, electronics and micro-processor advanced technologies.The wasit height turnstile is a improvement of intelligent tripod turnstiles.Equip various card-reading machines with hi-performance security protection to realize real-time warning and clever LED counter display guide passers .it balance pedestrian intelligent control and management.
sliding turnstile gates designs with tailored stainless steel make its elegance-looking,durable and anti-oxidation .Considering unique requests,we built-in standard electrical interface to best-fit customer easier using magnetic card,barcode,ID&IC cards integrated .This system provides civilized,well-organized pass management and meantime its prohibit illegal persons entry&out
- Long-life performance, high operation dependability and fast response.
- The whole system runs smoothly, low noise, no mechanical impact.
- Self-test function, when power on, system restoration automatic.
- Single directional or Bi-directional is selectable.
- LED indicator.
- Automatic reset function: when tripod turnstile receives an open single, but passenger do not pass through the hallway within a specific time (default 5s), turnstile arm will lock automatically.
- When power off, tripod turnstile arms will drop down automatically, which is complying with fire safety requirements.
| Model | RNCF-838 |
| Voltage | AC 220V/110V±10% |
| Frequency | 50/60Hz |
| Current | 3A |
| Control circuit: | DC24V |
| Power consumption | 40W |
| Working temperature | -20°C~60°C |
| Working humidity | 0~95%RH |
| Protection grade | IP44 |
| Arm length | 500mm |
| Arm diameter | 38mm |
Functions and Features of the sliding gates :
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one direction card reading and another no reading; one direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control concern.
8. Anti-rush function: if there is no open single, arm will be holding tightly.
9. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the flap barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.
10. Flap barrier is with standard electrical interface for the integration of various readers and writers.
11. Flap barrier can count how many passenger has passed and will show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Flap barrier can control the population inside in the control of software.
15. Stable running with little noise.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.