for electric bike using 12v battery charger for 12v 40ah lead acid batteries

for electric bike using 12v battery charger for 12v 40ah lead acid batteries

Brief description :

1. Aluminium case , light weight

2. Input voltage ; DC 100 V ~240 V  50 / 60 HZ

3. Max wattage : 120 W

4. Charge mode : 3 stage ( CC CV float mode )

5. Charging : High saturation and efficiency 

6. Input plug(power cords) : EU US UK AUS Italy Plugs etc ( can be Customized)

7. Output Connector : DC jack, XLR, JST, Cigar Lighter, Alligator Clips etc

The specification :

Note: Cut-off point for Li battery is 5% of CC, and it can be setted between 3-10%.

Charging Procedure :

1. First output power charger wire ends are connected to the battery anode and cathode , the charge

    indicator turns green, the connection is correct, otherwise the charge in question, please check the

    actual situation.

2. Then city power plug to socket , the indicator is red, charger will be into the charging state .

3. When the indicator light turns to green, the battery is charged to 95% , If you want to reach 100% ,

keep charging for 1 to 2 hours before end of charge.

4. When fully charged, disconnect the city power first, then disconnect the battery cable.