12 volt motorcycle battery trickle charger 2amp for lead acid & Gel& AGM batteries 10ah

12 volt motorcycle battery trickle charger 2amp for lead acid & Gel& AGM batteries 10ah

Brief Introduction :

12 volt motorcycle battery trickle charger is 3 stage cc cv floating charger, it is automatic smart  and high efficiency, multi-protection such as over-temperature , over-voltage, short circuit , reserve polarity etc, Satety and durable, easy to use and convenience to carry, It is good choose for your electric motorcycle !

Feature :

1. Aluminium case , light weight

2. Input voltage ; DC 100 V ~240 V  50 / 60 HZ

3. Max wattage : 120 W

4. Charge mode : 3 stage ( CC CV float mode )

5. Charging : High saturation and efficiency 

6. Input plug(power cords) : EU US UK AUS Italy Plugs etc ( can be Customized)

7. Output Connector : DC jack, XLR, JST, Cigar Lighter, Alligator Clips etc

The 12 volt motorcycle battery trickle charger battery charger specification :

Note: Cut-off point for Li battery is 5% of CC, and it can be setted between 3-10%.

Charging Procedure :

1. First output power charger wire ends are connected to the battery anode and cathode , the charge indicator turns green, the connection is correct, otherwise the charge in question, please check the actual situation.
2. Then city power plug to socket , the indicator is red, charger will be into the charging state .
3. When the indicator light turns to green, the battery is charged to 95% , If you want to reach 100% , keep charging for 1 to 2 hours before end of charge.
4. When fully charged, disconnect the city power first, then disconnect the battery cable.

For more information about our 12 volt electric motorcycle battery trickle charger or other items, don't hesitate to contact me !!