10amp 72 volt battery charger for lead cid batteries 100VAC ~240VAC input
10amp 72 volt battery charger for lead cid batteries 100VAC ~240VAC input
Brief Description :
72 volt battery charger is 3 stage cc cv floating automatic smart charger for lead acid batteries 10amp. It can be used electric scooter , electric forklift , electric vehicle , ev tools or ev products etc. High efficiency and high saturation , Easy to use and convenience to take . Safety and multi protection. That will be good for prolonging your batteries' lives.
Feature :
1. Aluminium case , light weight
2. Input voltage ; AC 100 V ~240 V 50 / 60 HZ
3. Max wattage : 900 W
4. Charge mode : 3 stage ( CC CV float mode )
5. Charging : High saturation and efficiency
6. Input plug(power cords) : EU US UK AUS Italy Plugs etc ( can be Customized)
7. Output Connector : DC jack, XLR, JST, Cigar Lighter, Alligator Clips etc
The 900W battery charger specification :
|
Nominal Output Voltage |
CV | CC | Transition / Cut-off Current | Net Weight | Size | |||
| Lead Acid | Li-ion | LiFePO4 | A | Lead Acid (A) | Li(A) | (kg) | (mm) | |
| DL900W-12V | 14.7V | 16.8V | 14.6V | 40A | 8.0 | 2.0 | 3.5 | 230*135*70 |
| DL900W-24V | 29.4V | 29.4V | 29.2V | 25A | 5.0 | 1.25 | ||
| DL900W-36V | 44.1V | 42.0V | 43.8V | 18A | 3.6 | 0.9 | ||
| DL900W-48V | 58.8V | 54.6V | 58.4V | 15A | 3.0 | 0.75 | ||
| DL900W-60V | 73.5V | 67.2V | 73.0V | 12A | 2.4 | 0.6 | ||
| DL900W-72V | 88.2V | 84V | 87.6V | 10A | 2.0 | 0.5 | ||
Note: Cut-off point for Li battery is 5% of CC, and it can be setted between 3-10%.
Advantage :
1. full automatic transition of cc cv and float/ cut-off (cc cv 3 stage charger)
2. Precise limit of voltage& current, guarantee fully charged and avoid over charger
3. Protections : short circuit, over voltage, over-temperature, reverse polarity protections, Dc output isolated from AC input
4. High Efficient : > 85% PFC :0.96 Eco-friendly
5. Two led indicators LED1 Red ( power on ), LED 2 Red/Green ( charging/full )
6. Safety and high quality, Advantage high frequency switching mode power supply technology
Charging Procedure :
- First output power charger wire ends are connected to the battery anode and cathode , the charge indicator turns green, the connection is correct, otherwise the charge in question, please check the actual situation.
- Then city power plug to socket , the indicator is red, charger will be into the charging state .
- When the indicator light turns to green, the battery is charged to 95% , If you want to reach 100% , keep charging for 1 to 2 hours before end of charge.
- When fully charged, disconnect the city power first, then disconnect the battery cable.
Package & Delivery
1. Package : one piece one neutral box , 12 pcs/ carton, can be customized
2. Delivery : 5 to 7 working days , big order according to actual quantity
3. Delivery port : Guangzhou port
4. Payment term : T/T or Western Union
5. Delivery way : by sea / by air / by express or as your requirement
For more information about 72 volt battery charger or other battery charger 12v 24v 36v 48v 60v , welcome to contact us !
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.






