3/4" depth, 16ga thickness, 1-7/8" hexagonal hole, 410S Stainless steel Hexmetal - HESLY China Factory sales
3/4" depth, 16ga thickness, 1-7/8" hexagonal hole, 410S Stainless steel Hexmetal - HESLY China Factory sales
HESLY’s Hex Mesh range is defined as a unique hexagonal cellular mesh steel, made of flat bar which is designed to provide brilliant retention and reinforcement of thin wall refractories and fully complements dense hydraulic and chemically bonded refractories in resisting erosion. It acts as a surface framework to hold cement or refractory in position, and relieves stress in the lining’s upper crust, retarding erosion, corrosion, blistering and cracking.
Hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal honeycomb- shaped grid.
The flexibility of HESLY’s Hex Mesh allows it to be rolled, and easily conforms to circular shapes. It is recommended for use when placement is spaced from the steel shell to allow room for thick insulation between the metal shell and the armoured surface.
 |
 |
| Hexmesh with Lances | Hex Mesh with bonding holes |
Typical Service Temperature of Different Material for Hexmesh
| Anchorage Material | Chemical Composition |
Typical Service Temperature |
||||||||
| AISI | DIN | C% | Si% | Mn% | P% | S% | Cr% | Ni% | others | |
| 304 | 1.4301 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.45 | ≤0.30 | 18.0—20.0 | 8.0—10.0 | N | 800℃ |
| 316 | 1.4401/1.4436 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 16.0—18.0 | 10.0—14.0 | N:Mo | 800℃ |
| 321 | 1.4541 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 17.0—19.0 | 9.0—12.0 | Ti | 800℃ |
| 310S | 1.4845 | ≤0.08 | ≤1.50 | ≤2.00 | ≤0.45 | ≤0.30 | 24.0—26.0 | 19.0—22.0 | — | 1150℃ |
| Inconel 601 | 2.4851 | ≤0.10 | ≤0.50 | ≤1.00 | — | ≤0.15 | 21.0—25.0 | 58.0—63.0 | Al:Cu | 1200℃ |
| Inconel 800 | 1.4876 | ≤0.10 | ≤1.00 | ≤1.50 | ≤0.45 | ≤0.15 | 19.0—23.0 | 30.0—35.0 | Al:Ti | 1200℃ |
| 410S | 1.4001 | ≤0.08 | ≤1.00 | ≤1.00 | ≤0.40 | ≤0.30 | 11.5—13.5 | ≤0.60 | — | 750℃ |
| CARBON STEEL | VARIOUS | 550℃ | ||||||||
| Name | Type | Description |
|
0Cr13 hex metal G-01 |
1.75X20X50mm | AS 0Cr13 hex metal,Used in 500--600°C,In petrochemical industry, |
|
1Cr13 hex metal G-02 |
1.5X20x50mm | Light hex metal ,as dual-layerlining in petrochemical and electric power industry |
|
1Cr13 hex metal G-03 |
331 | used in thermal power plants, steel mills, chemical refinery project,etc |
| thermostabilityHex metal G-05 | 1.5X15x50mm | As wear-resisting lining ,Be widely used as two inverter system double-layer liner in petrochemical industry, the circulating fluidized bed boiler cyclone separator in electric power industry. |
|
321 Corrosion-resistant hex metal G-06 |
1.8X20X50mm | be widely used in raw oil,nitrogenous fertilizer,sulfuric acid circulating fluidized bed boiler of thermal power plant projects,etc. |
| Light Hex metal G-07 | 1.0X10X50mm | Be widely used as two inverter system double-layer liner in petrochemical industry, the circulating fluidized bed boiler cyclone separator in electric power industry. |
|
A3 Steel hex metal G-08 |
2.0X20X50mm | As the framework,welded in inner surface of high temperature and abrasion resistance large diameter |
| Intensive hex metalG-09 | 2.0X30X30mm | As carbon steel hex metal,be widely used in raw oil,nitrogenous fertilizer,sulfuric acid circulating fluidized bed |
| Big hole hex metal G-10 | 2.0X20x100mm | As indefinite form lining |
| SUS304Hex metal G-11 | 14#X3/4"X2" | Light hex metal ,as dual-layerlining in petrochemical and electric power industry |
| Light Hex metal G-12 | LTWH-006 | As the framework,welded in inner surface of high temperature and abrasion resistance large diameter ,then coating the corundum lining material |
HESLY HexMesh
 |
 |
| Hex Mesh with Lances | Hex Mesh with Lances |
 |
 |
| Double Clench Hexmetal | Offset Lances Hexmesh |
 |
 |
| H type Hex Mesh | Bonding Hole Hexmetal |
 |
 |
| Refractory Hexmesh Lining | HESLY Hexmetal Mesh |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.