Huitian 5295 grey silicone potting compound, Room Temperature curing, lower cost potting sealants

Product Features:

Double component, addition type.

Ø Room temperature or heating curing.

Ø High performance on insulation, damp proofing, vibration resistance, chemical resistance, electricleakage resistance.

Ø No need to add primer coating before use

Ø High & low temperature resistant

● Main Applications:

Ø For the deep potting of power supply and electronic components and parts.

Ø Especially suitable for the potting of inside and outside LED displays that request for flame retardant.

● How to Use

Ø Before use, stir component A by hand or machine properly, keep component B sealed in the can and cut a proper hole at the sharp mouth of cartridge.

Ø Check whether it’s adhering to Applied Materials theoretically.

Ø Mix component A and B with the mix ratio A: B=1:1 by weight. Before hand simple tests are requested if you need to change the mix ratio.

ØNatural defoaming or vacuum defoaming. Natural defoaming: mix component A and B, stewing 20-30 minutes. ØVacuum defoaming:The vacuum degree 0.08-0.1Mpa.Vacuum pumping 5-10 minutes.

ØPerfusion:Completed in Handing Curing time

ØCuring:Room temperature or heating curing. In winter, curing time is longer, so suggest heating to curing.

● Technical Data

● Packing:

Ø 20kg/set: A: 10kg/bucket, B: 10kg/bucket.

● Storage:

Ø Keep it away from children.

Ø Use it in ventilated places

Ø In case of contact with skins, wipe and then flush with clear water.

Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.

Ø Store it in dry and shady places at the temperature of 8~28℃

Ø Storage life: 12 months since the date of manufacture.