3312 Series (HTU-3312) UV Curing Adhesive for glass , plastic , metal bonding
3312 Series (HTU-3312) of UV adhesive. low viscosity, for glass, plastic, and metal bonding, suitable
Product Features:
3312 Series (HTU-3312) UV curable adhesive is single component, low viscosity, UV curable adhesive for glass, plastic, and metal bonding, suitable for mechanical dispenser. Medical certification passed ISO-10993.
| Item | Unit | Typical Value | ||
| Color | Component A | Amber | ||
| Component of Basic Materials | Modified acrylate | |||
| Density | Component A | g/cm3 | 1.05 | |
| Viscosity | Component A | mPa*s | 200-400 | |
| Curing energy (mj/cm2) | 800 | |||
| Handing Curing Time | min | |||
| Initial Curing Time | hour | |||
| Full Curing Time | second | 40 | ||
| Tensile Strength | After Curing | Mpa | 0 | |
| Shear strength | % | 12 | ||
| Hardness | Shore D | 58 | ||
| water absorption (24h,25℃) | (%) | 1.8 | ||
| glass state temperature | (℃) | 50 | ||
| Stainless steel /PP drawing strength | Kg | 5.8 | ||
| Work Temperature | ℃ | -50-150 | ||
Typical use
Adhesive plastic and metal bonding, recommended for disposable injection needle.
Direction for use
The glued material surface should be dry, no oil.
When applied to the adhesive curing light intensity is not lower than 40mW/cm2, was applied to the surface coating time strength of not less than 100mW/cm2.
Matters need attention
Keep it away from children.
Use it in ventilated places
In case of contact with skins, wipe and then flush with clear water.
In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Package
1kg/Bucket, 12 Bucket/Carton
Storage
Store it in dry and shady places at the temperature of 8~28℃
Storage period is 12 months
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.