● Product Features:

Ø Single component, white color.

Ø Physical form: paste

Ø Made of metallic oxide and polysiloxane

Ø Wide operating temperature range

Ø Nontoxic, non-corrosive

Ø Eco-friendly, odorless

Ø Doesn’t go dry and flowing at high temperature.

Ø High performance on insulation, damp proofing, corona resistance, electric leakage resistance and chemical resistance.

Ø Can be dispensed both by hand or machine.

Ø Heat conductivity coefficient: 1.6W/(m·K)

● Main Applications:

Ø Widely used for the thermal conductivity of electronic components including the filling of gap between CPU and heat sink.

Ø For the filling of gap between high-power audion, thyrister and basic materials such as copper and aluminum to reduce the temperature of electronic components.

● How to Use

Ø Stir this product before using if it’s long time unused.

Ø Clean the object surfaces to get rid of oil and dirty before use.

Ø The object surfaces should be even and uniform.

Ø To dispense smoothly, please stir for 2 minutes before use.

Ø Apply a little for try before massive use.

Ø Only a thin layer of this product needed for use to avoid wastes.

Ø Do not keep this product exposed in the air for a long time.

● Technical Data

● Packing:

Ø 2kg/bucket, 6buckets/carton

● Storage:

Ø Store it in dry and shady places at the temperature of 8~28℃

Ø Storage life is 12 months from the date of manufacture.

● Caution:

Ø Keep it away from children.

Ø In case of contact with skins, wipe and then flush with clear water.

Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.

Ø For the use of this product, it’s not the more the better but the thinner the better under the condition of full filling of gaps is assured.