Huawei Switch S5710-52C-PWR-EI 48x10/100/1000 PoE+ Ports.4x10 Gig SFP+.with 2 Interface Slots, no Power Supply S5710-52C-PWR-EI
Huawei Switch S5710-52C-PWR-EI 48x10/100/1000 PoE+ Ports.4x10 Gig SFP+
The Huawei S5710-52C-PWR-EI is a high-performance Ethernet switch designed for enterprise networks. Here are its key features and specifications:
Key Features
-
Port Configuration:
- 52 Gigabit Ethernet ports, including 48 x 10/100/1000Base-T ports and 4 x 10GE SFP+ uplink ports.
-
Power over Ethernet (PoE):
- Supports PoE+ (IEEE 802.3at), allowing the switch to power devices like IP phones, wireless access points, and security cameras directly through the Ethernet cables.
-
Layer 2 and Layer 3 Features:
- Supports advanced Layer 2 features such as VLANs, spanning tree protocols, and port aggregation, as well as Layer 3 static routing and dynamic routing protocols.
-
High Performance:
- Designed for high throughput and low latency, making it suitable for demanding applications.
-
Scalability:
- Can be integrated into existing networks and scaled as needed, supporting various network topologies.
-
Energy Efficiency:
- Features energy-saving technologies to reduce power consumption while maintaining performance.
-
Management:
- Provides various management options, including a web interface, SNMP, and command-line interface (CLI) for easy configuration and monitoring.
Use Cases
- Enterprise Networks: Ideal for medium to large enterprises needing reliable and scalable switching solutions.
- Campus Networks: Suitable for deployment in educational institutions, providing connectivity for students and faculty.
S5710-52C-PWR-EI Overview
S5710-52C-PWR-EI(48 Ethernet 10/100/1000 PoE+ ports.4 10 Gig SFP+.with 2 interface slots.without power module)
Technical specifications
|
Item |
Description |
|---|---|
| Memory (RAM) | 512 MB |
| Flash | 200 MB |
| Mean time between failures (MTBF) | 36.86 years when an 8-port GE optical card is configured, 36.35 years when an 8-port GE electrical card is configured, 35.27 years when a 2-port 10GE interface card is configured |
| Mean time to repair (MTTR) | 2 hours |
| Availability | > 0.99999 |
| Service port surge protection | Common mode: ±1 kV |
| Power supply surge protection |
|
| Dimensions (H x W x D) |
44.4 mm x 442.0 mm x 420.0 mm (1.75 in. x 17.4 in. x 16.5 in.) When 1150 W power modules are installed, they stretch out from the chassis. Therefore, the total depth of the switch changes to 507.3 mm (19.97 in.). |
| Weight |
|
| Stack ports | Four fixed 10GE SFP+ ports on the front panel or ports on the 2-port 10GE rear card |
| RPS | Not supported |
| PoE | Supported |
| Rated voltage range | 100 V AC to 240 V AC, 50/60 Hz |
| Maximum voltage range | 90 V AC to 264 V AC, 47 Hz to 63 Hz |
| Maximum power consumption (100% throughput, 100% PoE loads, full speed of fans) |
Using two 580 W power modules
Using two 1150 W power modules
|
| Operating temperature |
0°C to 50°C (32°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE:
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage temperature | -40°C to +70°C (-40°F to +158°F) |
| Noise under normal temperature (27°C, sound power) | < 60 dB(A) |
| Relative humidity | 5% to 95%, noncondensing |
| Operating altitude | 0-5000 m (0-16404 ft.) |
| Certification |
|
| Part number | 02355886 |
S5710-52C-PWR-EI appearance
| 1 | Forty-eight PoE+ 10/100/1000BASE-T ports | 2 | Four 10GE SFP+ ports
Applicable modules and cables:
|
| 3 | One ETH management port | 4 | One mini USB port |
| 5 | One console port | 6 | One USB port |
| 7 | Ground screw | 8 | Rear card slot 1 |
| 9 | Rear card slot 2 | 10 | ESN label |
| 11 | Power module slot 2 | 12 | Power module slot 1 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.