Ortlan ACSR 1033.5MCM Overhead Bare Conductor With ASTM B232 Standard

Price Negotiable

Price: USD 0.06-8.52/M

MOQ: 500m

Delivery Time: 7 Days

Brand: SHAN CABLE

Product Description

Ortlan ACSR 1033.5MCM Overhead Bare Conductor With ASTM B232 Standard China Shanghai Manufacturer.

1. Applications

ACSR conductors have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

Shanghai Shenghua Cable (Group)Co.,Ltd.
Test Report
Specification :		ACSR1033.5MCM Ortlan	Item:	Aluminum Conductor Steel Reinforced
Standard:		ASTM B 232	Date:	2017.1.5
No.	Item	Standards and Requirements		Test Results	Evaluation
1	Dimension of conductor
1-1	Overall Diameter mm	30.81±1%		30.82	Qualified
1-2	Number of AL. wire	45		45	Qualified
1-3	Number of steel wire	7		7	Qualified
1-4	Diameter of Al.wire (mm)	3.85±1%		3.850 3.852 3.858	Qualified
1-5	Diameter of steel wire (mm)	2.57±0.051		2.572 2.580 2.604	Qualified
1-6	Stranding direction	Rightward		Rightward	Qualified
1-7	Appearance	The surface of the stranded wire is smooth, glossy and tightly stranded		Meet the requirement	Qualified
2	Lay ratio
2-1	Lay ratio of steel wire	18-30		18.1	Qualified
2-2	Lay ratio of 12 wire layer	10-17		15.8	Qualified
2-3	Lay ratio of 18 wire layer	10-16		13.6	Qualified
2-4	Lay ratio of 24 wire layer	10-13		11.3	Qualified
3	Performance of steel wire
3-1	Tensile strength MPa	≥1340		1410	Qualified
3-2	Elongation(250mm) %	≥3.5		3.6	Qualified
3-3	Stress at 1% extension MPa	≥1280		1302	Qualified
3-4	Mass of Zinc coating g/m2	≥229		254	Qualified
3-5	Zinc coating adherence	No crack		Meet the requirement	Qualified
3-6	Wrapping test	The wire shall be wrapped around 1 time the diameter of the wire, from a close helix of eight turns, wire shall not crack		Meet the requirement	Qualified
4	Performance of aluminum wire
4-1	Tensile strength MPa (after)	≥160		163	Qualified
4-2	Wrapping test	The wire shall be wrapped around 1 time the diameter of the wire, from a close helix of eight turns, withdraw six turns, wire shall not crack		Meet the requirement	Qualified
4-3	D.C. resistivity at 20℃ Ω.mm2/m	≤0.028264		0.027812 0.027902 0.027721 0.027825	Qualified
5	Performance of conductor
5-1	Tensile strength kN	≥123.1		124	Qualified
5-2	D.C. resistance at 20℃ Ω/km	≤0.05531		0.049	Qualified
5-3	Weight kg/km	1732		1732.1	Qualified
5-4	Lay direction	Rightward		Rightward	Qualified
Conclusion: The performances tested meet the technical requirements of ASTM B 232, IEC 60888, IEC 60889. Permission to deliver the products.

Tested by:		Checked by:		Approved by: