Paper Industry Single Side Adhensive Tape, Water Soluble Splicing Tape for Coating, Printing, Film

Product descriptions:

Flash splice tape 90B is a combined paper splicing tape, which is composed of a single side and partial double sides. Both the glue and base material are resistant to high temperature.

The tape is particularly suitable for high speed flying splice applications in any kind of film converting processes like flexo and rotogravure printing as well as laminating processes.

1.

Features:

Very high tack properties, no need to reduce the speed when changing rolls,

Strong adhesion to any paper or film,

The joint thickness is thin,

High temperature resistance, can pass through 200 ℃ oven smoothly,

The joint is easy to make and saves time. One straight line can be pulled,

After the connector is connected, the end face is flat, and the deviation adjuster is free of correction,

The joint is thin, and there is no bounce through each pressure zone, so it does not need to be opened to pass smoothly,

Glue has high and low temperature resistance, during 365 days, and the viscosity is unchanged every day,

2.

Function:

Pre segmentation of release paper to realize splicing,

The back is equipped with a positioning strip, which is convenient for positioning and can be quickly separated when splicing paper,

The positioning and layering force is stable, not easy to fall off during pre acceleration process,

The red design is convenient for joint identification.

3.

Main applications:

The coating liquid contains water and needs to pass through the high factor oven (the tape head has the function of high temperature resistance) to change the roll at a speed of 0 to 2000 meters per minute without reducing the speed. At present, it is widely used for silicon coating, film and thermal paper change of adhesive primer.