6"inch -20"inch Ultra Thin Sintered Diamond Lapidary Notched Rim Saw Blades With Single Directional Blades

6"inch -20"inch Ultra Thin Sintered Diamond Lapidary Notched Rim Saw Blades With Single Directional Blades

DIAMOND LAPIDARY NOTCHED SAW BLADES

The outside rim of the blade has hundreds of thin notches filled with diamond and will cut even the hardest rock. The depth of the notches is 5mm.

These saw blades are steel core and are designed specifically for cutting rocks. They will also work well for cutting ceramics. The strength of steel gives you a thin kerf (thickness of cut) so you don't waste a lot of precious material.

The blades will rust if left standing in water for an extended period of time. If you choose to leave your blades in water over night we recommend adding a rust inhibitor to your water. Blade life can be extended with the use of a water based cutting oil.

We can also supply a saw blade bush to fit 1/2" , 5/8", 3/4" or 7/8 " with this blade. The bushings must be requested when you place your order.

If the blade seems to slow down in cutting, you can take an old corundum grinding wheel 100 or 80 grit, slice into this a few times, and you once again have a clean smooth cutting blade. We also stock aluminium oxide dressing sticks for sharpening these blades and also for cleaning our diamond wheels.