Silk screen printing squeegee/rubber squeegee/Squeegee
Squeegees are an essential tool for screen printing, probably the most important piece of equipment besides the actual screen! Shanghai SRING cooperated factory is established in 1988, with nearly 20 years experience.

A brief description of polyurethane squeegee blade/PU squeegee blade for silk screen printing

Polyurethane squeegee blade/pu squeegee blade for silk screen printing is used to force the inks through the screen and help achieve an even print, it is important factors in getting sharp, clear Prints.
Polyurethane squeegee blade/pu squeegee blade for silk screen printing will control ink flow through fine, detaile stencils increasing resolution and overall print quality.

Hardness Selections

Red, Soft PU1-PU4	Suitable for low viscosity ink printing, low density or tough surface printing.
Green, Medium PU5-PU6	High pressure resistance. Suitable for high or low viscosity ink or high density surface printing. Could easily control the ink amount and assure the precision of the printing.
Blue, Hard PU7-PU10	Highest pressure and strongest ink solvent resistance. Could easily control the ink amount and get the highest quality printing.

The water-based squeegee is widely used in screen printing on textile, decoration, unevenand rough surfaces.

It performs well in medium pressure, low counts mesh, and low viscosity ink.

Water-based bevel squeegee in aluminum handle:
Water resistance and strong durability in Aluminum Handle, commonly used in manual screen printing. 4inch-51inch.

Squeegee for Screen Printing Specification:

Material	TDI, MDI, PPG, PTMG,PUetc.
Color	as requested
Hardness	50-95(Shore A)
Density	1.12-1.25g/cm3
Tensile Strength	25-55Mpa
Tear Strength	85-155KN/M
Elongation	450-650%
Impact Elasticity	>20-30%
Tolerance	0.1-0.3mm
Working Temperature	120°C(max)
Surface Finish	One side or both

Mob/WhatsApp/wechat::0086-18117348869
Email: info@silkscreenmesh.com
Skype: springmesh